🍳 Evelots Pot Lid Storage Organizer - Cabinet Door/Wall Mounted - Holds 6 Pot/Pan Covers - No Scratch Solution Review

Mounting - I skipped the part in the description that the thin doors have to provide their own mounting parts. There was no hint in the brochure, but another review suggested control hooks (which are quite expensive, but I still have some Christmas decorations left). Handle Type - We have a smorgasbord of lid styles. I have found that when I twist some of the flat handle lids they fit without falling out. Round buttons are definitely the best. Space - You need deep cabinets. My largest lid…

As other reviewers have said, it doesn't work well for cupped lips and you have to fiddle with it and pull the metal down to put things in. And when there are several pans in it, it's difficult to get other lids in between. For my particular application there really isn't any other decent solution and this was one of the cheapest options. Not perfect, but everything worked out. Also, the location of the holes is a total pain as you can't put a drill there and a drill is required if you're…

Super easy to install. Yes, you have to bend them to fit the lids. I read the reviews and knew this beforehand, so I bought the unplated silver set because some people have mentioned that the plating cracks when the metal is bent. I also only have 8 caps but I bought two of these to fit 4 caps in each as I figured I wouldn't be able to use every slot with the curved caps. I was right and my hats fit perfectly, 4 per post. Tip: Place the rack as close to the cabinet doors as possible so you can…

Easy to install in just minutes. I used some strips of permanent tape to hold it in place while I screwed it to the closet door. I thought there would be some soundproofing too. The manufacturer provides you with two screw lengths so you can choose which size works best for your case thickness. Removing the middle covers is cumbersome. But I'll get used to it. I need to lower the lower one and then raise the desired one. Otherwise all the handles will hook and they will all come out. Keep in…

The size just doesn't fit most closet doors, not to mention there are elements in the hardware that suggest it should be installed on drywall . I would never do that considering how the weight would sit on the screws. Also, its construction is very rudimentary, with washers welded on for the suspension points, with very small welds that may have been sanded to make them look better, raising the question of how long they will hold the weight of the glass covers popping off them. If I could find…

I ordered this particular stand because it was the only one that fit our small closet door (only 1/4 inch extra space at the top) and ) The first thing that struck me What I noticed was that the jamb was deformed and didn't fit the door snugly. Second, the instructions said the kit included 1/2" and 3/4" screws. Instead, the kit included screws. 1/2" and 1" The metal tabs through which the screws attach the sides of the rack to the cabinet door were welded so tightly to the metal racks that the