💾 G.Skill Trident Z NEO Series 128GB (4 x 32GB) 288-Pin SDRAM PC4-28800 DDR4 3600 CL18-22-22-42 1.35V Quad Channel Desktop Memory Model F4-3600C18Q-128GTZN Review

Increased memory on Threadripper 3970x from 64GB to 128GB with 4 32GB sticks. Nominal frequency 36,000 MHz. After installation, it works without any problems and passes my stress tests. But there were problems with detection, and a poor quality memory stick had to be used to prime the pump. Never attempt to install these kids without a stick of inferior memory as a backup. I had to delete Space so I know how to do it before installing too. I love the light and of course I don't use RipJaw…

Excellent low quality memory compatible with Be Quiet Dark Rock 4. Tested on Intel platform. El perfil XMP identifies itself in the BIOS.

UPGRADE CROSSHAIR VIII HEREO TO MAXIMUM RAM 128GB, RAM RUNS AT 3600MHz. Make sure your motherboard firmware is up to date.

They look absolutely amazing and look very well put together. However, RBG doesn't work well with Gigabyte RGB Fusion, just a warning if you're looking to buy and install it on a Gigabyte board.

My configuration: ASUS X570 Strix-I motherboard. Ryzen 5 5600X CPU ASUS Strix 3080 GPU All I had to do was enable the DOCP memory settings in the BIOS. He immediately recognized the RAM modules and their rated speeds. Very simple - in the BIOS settings it took less than 1 minute. Saved and no problems so far.

They look absolutely amazing and look very well put together. However, RBG doesn't work well with Gigabyte RGB Fusion, just a warning if you're looking to buy and install it on a Gigabyte board.

My setup: ASUS X570 Strix-I motherboard. Ryzen 5 5600X CPU ASUS Strix 3080 GPU All I had to do was enable the DOCP memory settings in the BIOS. He immediately recognized the RAM modules and their nominal speed. Very simple - in the BIOS settings it took less than 1 minute. Saved and no problems so far.

Pros: It works well on Asus Rog TRX-40 motherboard and 3960X Threadripper. This was installed on a new building and is very stable. Passed all memory torture tests with no problems. The modules are beautiful and well thought out. Cons: The product registration page on the G-Skill website is unavailable and could not register for the warranty because the part number could not be found. Contacted GSkill but got no response from them.

Increased memory on Threadripper 3970x from 64GB to 128GB due to 4 sticks of 32GB. Nominal frequency 36,000 MHz. After installation, it works without any problems and passes my stress tests. But there were problems with detection, and a poor quality memory stick had to be used to prime the pump. Never attempt to install these kids without a stick of inferior memory as a backup. I had to delete Space so I know how to do it before installing too. I love the light and of course I don't use RipJaw…