📊 Enhanced RT6 Tachometers by General Technologies Corp Review

I bought this product because I needed extra reflective tape for the laser touch sensor which I also bought. I service several gas powered golf cars and had to check the RPM on each of them. I put a strip of duct tape on the outside of the clutch housing and measured the speed with my laser tachometer. Works perfectly. I found the tape quite expensive for what you have but it worked well.

Purchased for use with a laser tachometer to check the RPM of a 2-stroke engine mounted on a small hovercraft. Worked very well. The hardest part is getting the tape in the right place so you can hit it at the right angle with the laser point. You want to mount it on a surface so the laser point can be applied to it fairly straight (perpendicular) to get a good measurement. Strange angles simply reflect the laser and your readings appear anywhere on the map. Once you got things in the right…

I bought this tape along with the photo tachometer I ordered. The only reason I bought it was that the shipping was supposed to be around $7 and the strap was $10 I think. So I estimated the actual cost of the tape at $3, which is about what I think it should be worth. I haven't tested it, but I think I could buy reflective tape at your local Ace hardware store for a lot less. One small issue is that this isn't the easiest tape to remove the backing. So if you need something to get yourself…