GripPRO ATV Anchors for Polaris Lock & Ride Knob Tie Down 🔒 Anchor Kit - Set of 4 KNOB Anchors Designed for RZR, Sportsman Ace ATV's Review

I used these to mount a black 2 seater recliner on the back of my 2029 Sportsman 570. Works well but still attaches to the trunk extension. I love the concept and they are easy to use. Just know where to make the hole and drill a 1 inch diameter hole. Some people may want to put some sort of large washer around it to increase surface area and better secure the load.

I have a RZR with Lock & Ride accessories and this is where I got the idea/need to use this product. I use them to mount a router table, plane and miter to saw through horses. I mounted the tools to 3/4" plywood first and then drilled 1" holes through and into the saw blades - they hold up great - use the same jig for each tool and they are very easy to change out.

These are really good anchors. I have a Polaris Ace for my daughter and we wanted to add some storage to the back of the quad. So I built a basket support and used it to secure the support. She has spent several hours on the quad since we installed the anchors and so far has had no problems. The benefit of using these anchors is that they make it easy to remove or install blocks in just minutes.

. The blue handle is a decent length and seems to match the trunk depth of a typical ATV. The design allows the gripper to be lowered on the threaded shank to accommodate longer reaches or taller mounts. You will most likely need to do this to ensure the grip is deep enough in the rack to get a good bite. Then you can actually turn the handle and secure your load! Would definitely recommend and maybe buy another set.

I love these anchors. Excellent quality, user-friendliness and customer enthusiasm at the highest level. A small American company that makes high quality products. What not to love. If you have a lock and ride Polaris machine, this company is for you. I know I will not buy and anchor my lock anywhere else. Bought these to use with the Kolpin Stronghold mount for the Stronghold Cannonboot. I would only trust my gun to the highest quality anchors. It's not worth buying cheap fakes hoping my gun…

I used these to install a Kimpex Nomad storage seat on my 2017 Athlete. I removed the stand, placed it under the Kimpex seat and marked where my holes would be, then drilled the holes. I put the rack back into the wheel and then inserted two anchors into the rack and used them to secure it. Unfortunately only 2 locking holes lined up with the post and I had to use 2 U-bolts on the back of the round tube. They feel solid where they attach to the post, but there is a bit of bounce up and down. in