🍽️ Hanging Plate in Polished Brass, 14-18 inches Review

We used these to attach wing mirrors to a chain link fence and they work great! Being made of brass we don't have to worry about rusting and they hold the mirrors to the fence very securely. Helped us create the eclectic backyard we wanted with the illusion of more space!

Will not work with 11" bowl. It was 3" deep and prevented the item from being hung after stretching . . i ran the wire to hang the frame through the springs so it could hang.Made for plates or VERY thin bowls to hang like this.

Very good quality and holds well the plate that we wanted to hang on the wall. Not sure if the description mentioned clear plastic bushings in the plate holding area. Very good. Slight chance of scratching the plate. Also included was a wall hook and a pretty little nail to attach the hook to the wall.

Works fine. The plastic coating on the ends of the holder protects the plates/cymbals. Springs are limited by the weight of what you're hanging. I installed this on my rectangular board and then used some wire to connect the top and bottom together. It is perfectly normal for hanging objects heavier than springs to be securely supported, otherwise the spring will stretch and the panel/plate will fall.

I have previously purchased 2 OOK cymbal hangers for up to 14" diameter. One panel was only 14" wide and due to the depth it fitted very tightly. So I got a Tis 14- Bought 18 hangers. The fit was good but the springs are too loose. This panel was on the low end of the weight limit but it stretched the springs so much it couldn't stay on the wall. The key here is that the plate was small both in diameter and in weight.I chose the original OOK clothes hanger and am very satisfied.