🚨 HERCOO Smoke LED Side Marker Lights Full Kit for Ford Super Duty 1999-2010 Aftermarket Replacement, Dually Bed Fender Compatible Review

Great little spare lights, we'll see how long they last. I say that because they don't use steel brackets to mount it, it's just a double sided sticky pad that mounts the flashlight.

Works perfectly. I connected them directly without the connector. Double sided foam automotive tape has held them up for two years with no problem, simply wipe the mating surfaces with alcohol or thinner to remove wax or other films before applying. Very satisfied.

Yes, they work. But they are held in place with double-sided tape. No clip like OEM. The factory lamp socket is designed to reside within the lamp assembly and is therefore watertight. They have a pigtail on the outside of the lamp with no water seal. Lampholders that fail due to corrosion cost more than the lamps themselves.

These little guys are very light for their size and the tape sticks like I've never seen before. They were easy to install, simply plugging into an existing wire and taped over the hole the old ones had left. They get lots of attention and lots of extras, will definitely recommend them and buy more items from this seller.

Recently installed on my truck. They look good but the quality is not. The connectors are very poor and are installed with double sided tape instead of the factory clips. I had to secure the plugs in my sockets as they couldn't be left alone! Make sure you use lots of dielectric grease as there is nothing left to prevent the connector from contacting the elements. If they didn't look and work well I would send them back.

One of my factory dual marker lights eventually fell off so I bought them and replaced them all with these. Very easy to install, plugs straight into the factory fixings and comes with double sided tape to secure in place. I chose the color of the smoke to match my headlights and taillights. I would highly recommend them to anyone looking to upgrade their existing parking lights or if one of these has fallen off like I did.

very good quality headlight! Very bright. I wasn't keen on the "sticky" lights, but surprisingly they stick well. Installation is of course very simple, just plug the pigtail into a factory outlet. I decided to seal the joint really well, but that's probably not really necessary. They take some getting used to visually as they are not as smooth as the factory parts. They're pretty big little blisters on the wings, but they look great once you get used to them. I would happily recommend them to…

JUNE 2019So I bought a second set to replace the one that burned. After inspecting the new kit, I realized why and how moisture is in the last kit. If you remove the adhesive pad and look at the back of the flashlight where the lens meets the base, you can clearly see that this is where moisture is entering the flashlight body. I used clear silicone and put a small bead in these seams, hopefully this will prevent water from entering this set. The picture shows the white silicone before it turns