Header banner
Revain logoHome Page
hobbyunlimited polyolefin transparent shrink diameter industrial electrical logo

HobbyUnlimited Polyolefin Transparent Shrink Diameter Industrial Electrical Review

2

·

Average

Revainrating 3.5 out of 5  
Rating 
3.5
🔌 Wiring & Connecting, 💡 Industrial Electrical

View on AmazonView on ЯM

Media

(4)
img 1 attached to HobbyUnlimited Polyolefin Transparent Shrink Diameter Industrial Electrical
img 2 attached to HobbyUnlimited Polyolefin Transparent Shrink Diameter Industrial Electrical
img 3 attached to HobbyUnlimited Polyolefin Transparent Shrink Diameter Industrial Electrical
img 4 attached to HobbyUnlimited Polyolefin Transparent Shrink Diameter Industrial Electrical

Description of HobbyUnlimited Polyolefin Transparent Shrink Diameter Industrial Electrical

Approx. 30ft (9m) of transparent heat shrink tubing with 2:1 shrink ratio. Diameter is approx. 3/4in (20mm). Please note the maximum width of the tubing is 1.3in (34mm). This is the width when the tubing is completely flat. Clear/transparent color with no printing on the tube. Divided into two bundles of approx. 15ft each.

Reviews

Global ratings 2
  • 5
    0
  • 4
    1
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 3 out of 5

Should be supplied in 3:1 aspect ratio

I didn't lose as much weight as I wanted, I think it might have been my fault I didn't get 3:1 but still wasn't happy with the end result.

Pros
  • Divided into two packs of approximately 15ft each.
Cons
  • Not bad but...

Revainrating 4 out of 5

Shrinks 2:1 but has 20mm inner diameter instead of 3/4″. Slightly opaque.

Shrink 2:1 , but 20 to 10mm instead of 3/4" to 3/8" as advertised. I used a heat gun to check for shrinkage as I needed a final 3/8" ID. Revain lists it as 3/4 inch but the packaging says 20mm. Unfortunately, 20mm is 0.787 inch, not 0.75 (or 3/4 inch), and 10mm is 0.394, not 0.387 (or 3/8 inch). It doesn't seem like much of a difference, but when I tried squeezing it around a 3/8" metal rod, it didn't sit firmly on the rod. It was just over 1/16 inch and slipped off the pole slightly. Debris…

Pros
  • Diameter approx 3/4" (20mm). Please note the maximum tube width is 1.3" (34mm). This is the width when the tube is completely flat.
Cons
  • Obsolete