🔧 HomeRight Rapid Clean Tool for Easy Maintenance of Finish Max & Super Finish Max HVLP Paint Sprayers - Multicolor Cleaning Tool Review

I bought a HomeRight C800766 Finish Max Fine Finish Sprayer and wanted an easy way to keep it clean. This accessory works wonders to speed up the process. Simply screw onto a hose or faucet and slip onto the sprayer inlet, after a minute of use the nozzle and sprayer will be paint free! You still have to take the atomizer apart to try and clean some of them. internal parts but it turns a 20 minute job into a 5 minute job. Work for the price I paid - you'll love it too.

For those who say it doesn't fit the Super model. It is, but you have to remove the suction tube and use the smaller tube that comes with the cleaning kit. So this kit only cleans the inside of the gun, not the receiver tube which has a large surface area that needs cleaning. It bothered me at first, but after evaluating the process I see no reason to run old, possibly curdled paint through the gun. It would be like using dirty bath water before applying soap and rinsing off. So yeah, cleaning…

Ok, it's easy to use. I acknowledge it. But let me give you the scenario (as it is for me now): I used the syringe in December, it was 22 degrees outside and a foot of snow. This quick clean uses a hose connector with a bib. I need to hook this up to a hose so I can quickly spray and clean it from the outside. I just can't do it because everything will freeze. I would say you can use this internally with the right flushing adapter but then you have to run the atomizer. It's not something I want

I'm glad I waited to write a review as the first 4 times I've used it I've failed. First, directions don't speak for themselves. I learned more from other reviewers. It won't fit a regular faucet, so go straight to the hose and attach it to the wall spout. After you have attached all the parts, you must press the hose firmly against the gun, otherwise it will burst when you pull the trigger and you will get paint all over your face. Therefore, dexterity is required, using both hands to hold and

1 star ratings are unfair to the product. Is it possible to clean the atomizer without it as described by others. Yes, you can, it just takes a little more effort. The bottom of the black screw-in part is perforated to keep the atomizer from letting water in until you pull the trigger. That makes sense and I suspect that the atomizer cannot be damaged by the pressure from the hose. Could something like that be made cheaper? These are 2 clamps, a piece of tubing and a plastic cap; If you had…

This device has several problems. First of all, the device does NOT fit on any faucet when delivered. It fits on the end of the hose, but that's about it. You will need a faucet screw adapter that fits the threads of the hose. (Home Depot has some clear photos of it). Second, the instructions are not very clear. If you bought the Super Finish Max like I did, you will need to REMOVE the suction tube that came with the machine and use the thinner one that comes with the quick clean. You must also

Buying a kit that speeds up cleaning made perfect sense. Unfortunately, cleaning with this kit is a nightmare. The suction tube does not stay attached to the Super Finish Max. The first time I tried to clean it, the suction tube popped out completely (yes, I secured it with a zip tie per the instructions). Paint and water spattered me and everything around me. This of course doubles the cleaning time. I went back to the instructions to see if I missed anything. I tried a second time and the…