🔌 Enhance Your Electrical Outlets with IMBAPrice 1 Gang Outlet Extender Review

The concept is good but I didn't even use them because the tabs holding them flush to the wall are too weak. Your local hardware store should have the best at a decent price.

We used this on a kitchen renovation where the outlets needed to be routed through the cabinets. My husband liked them so much we ordered more for our next renovation project.

The item shipped to me does NOT have a UL mark on the plastic extension ring. They sent me a CAT 1 low voltage extension box which is totally unsuitable for 120V mains voltage applications

They work great and are flexible with many extensions. I used them after adding 2" of foam insulation to a project and they worked great. They also include extended bolts and come in packs of 2. Highly Recommended!

They worked great. A fairly thick barn wall panel has been fitted to the wall to prevent the plugs from getting stuck when something is plugged into it. I also looked at the code to make sure I didn't do anything wrong and found that this is required when making an existing wall thicker.

Seems fine except it doesn't extend every 1.5 inches as described. only 1.5" and by the time you screw it in far enough to hold the box extension the extension is about 1.25" so I had to buy longer screws (#6-32 x 2") to get a full 1.5". extend customs. ".

Everything appears to be fine except does not extend a full 1.5 inches as stated in the description. The box extension is that size but the screws are only 1.5" and when you screwed them in far enough to hold the box extension the extension is about 1.25" so I had to go and purchase longer screws (#6 - 32 x 2 inch) to extend a full 1.5 inches. .

The plastic is flimsy but once everything is in place this shouldn't be a problem. They worked for outlets that were set to 1/2" drywall but needed a 5/8" that fitted nicely into the existing outlet and also for outlets that were set to 2X4 but after the drywall was in place. and a 1/2" decorative rosette was placed above it. They filled in the space, widened the exhaust box and helped stabilize the exhaust when a metal cap was fitted with it, alleviating concerns about gaps that were already…

Simple but works great. I had 1 box that was recessed about 3/4" deep and on top of that the installer cut a hole about 1/2" too big on the top. The wall panel covered it but the top rosette was awful because it moved every time I tried to use it. I never noticed him before because he was in the guest room. I installed it and was able to take a piece of drywall and fill in a bigger gap than needed. The new drywall standoff overlapped where the screw goes, but I just drilled through it before…