LASFIT Switchback Polarity Extremely Daytime Review

I installed bicolor LEDs in my 2014 Tundra 3157 initially without resistors. The DRL/turn signals were cool white with hyperflare. (They looked pretty amazing compared to the OEM bulbs). Later I installed the appropriate terminating resistors. When installed, the headlights were white with amber turn signals. SWEET! Not so fast, after the truck restarted the lights turned amber and stayed amber. They still look cool but I prefer the two tone option as advertised.

Bought a Lasfit Switchback 3457 to replace the front signal lights on a 2013 Honda Pilot. According to the item description, there was no need to install resistors along the length of the light to avoid excessive flickering, but before I put it back on I noticed that it wasn't, but decided to keep the product anyway. It turned out that the LED was not firmly attached to my seat belt and could not be felt in the headlight assembly. A nasty project to get the light back had to remove the front…

This works great in my 2018 Jeep Wrangler JK as front turn signal. The high beams are white and then change to amber/amber when the turn signals or hazard warning lights are used. In order to convert the LEDs it was necessary to install a resistor on the turn signal wire. FYI, my application lists 3157NA or 3757A. The 3157 flashlight can be converted for use by cutting off the plastic retaining tabs on the side of the bulb. Then it works great! So far they work great and are much brighter than…

I searched Amazon 2015 Toyota Camry SE and these headlights SAY they fit my car, when the headlights arrived they didn't fit because they are too big and won't fit in the turn signal hole. . I returned and they charge me $8 for a return label. I bought a second set which was the closest and they were smaller for the cornering light hole so they will charge me another $8 to return the second set of lights so literally they charge me $16 dollars for the return shipping fee. for the lights saying…

I bought these switchable LEDs because they said they would fit my 2011 Toyota Tacoma and I knew I would need to install resistors for the hyperflash. These bulbs actually plug into sockets and the amber light is very bright and looks very nice in the case but does not work as advertised with factory DRL lights so they only flash amber never solid white DRL. It turns out that the Tacoma uses the same CRT (light element) input for both the DRL and the turn signal when the headlights are off…

I purchased this item to complete a complete replacement (indoor/outdoor) with LEDs from 20th century incandescent and halogen lighting. Even if the plastic case doesn't come close to OEM thickness/quality, it's still good a few months after the rebuild. The clear, unpatterned lens allows the Switchback DRL/Park/Turn (Yellow/White) LEDs to shine and project brightly utilizing the molded light diffusion design. Despite the age of my car, the old lighting has been brought into the 21st century…