Lesco 050568 Star Edger Blade By Stens (375-411), Black Review

Unlike the flat straight blade that smashes against the sidewalk when you are edging this blade stays in the groove and does a fantastic job of edging. I have gone though so many of the straight flat blades as just one wrong move and they get all banged up in hitting the cement sidewalk.

Edges grass like no other! Very aggressive bite, chews up grass and dirt and spits it out. Seems very durable, but I will find out next time I do the entire 500' of edge for my yard.

It's a very good blade and you're going to love this blade it has incredible balance and has way less vibration than a traditional blade

Easy to install and edges clean. I usually replace this blade every 2 years, but could push it out another year easily. Thanks for attention.

Have tried the triple edge ones and wondered if the four edge would work. Cuts very well and will probably stay with these. Price was good too.

Was a little on the expensive side compared to what I used to pay for OEM versions. Easy to install, but have only used this blade twice, so jury is still out on durability.

Why did I wait so long to replace my blade? This one does much better than the factory blade on my vintage jacobsen. The product may not be made from durable materials.

Arrived right in time. Fit perfectly and have used it many times already. Very pleased. I am sure I will be ordering another when this one wears out.

A much better product than a two edge metal blade that usually comes with a lawn edger.It cuts faster and straighter and is well worth the extra few bucks it costs .

I offset the blades a 1/2" and used this blade to turn my 3.5hp edger into a trencher that I used to install an electric dog fence.

This replaced a single blade on my Black & Decker electric edger. The blades which come with the edger are a long, single blade, and I find that I wear them out after 1-1 1/2 uses. This blade made cuts like a hot knife through butter, and it should last longer since it has the 4 cutting surfaces instead of just 2. It did well today and did not seem to wear nearly as much. I'll likely buy another like it.

Replaced on an old Craftsman edger I have and fits perfectly. Quick to install and working better than 2 pronged one that I had.

I purchased this for an old Craftsman edger that used the straight blade, since replacements were getting hard to find locally. I figured this was worth a shot and so far I am happy with the way it works. It cuts a little smoother than the original style blade. It’s a little larger than OEM so until the blade wears a little bit, I have to always keep the machine tilted up when not cutting or the blade will hit the ground even in the fully raised position. Not a big deal. After using this for…

If you want a good clean edge this is the blade you want to try. If I had known it cut so clean and fast I would have bought one when I purchased the edger. Long story short the best edger blade on the market in my opinion. Try it you'll like it.

I have a huge corner yard with about 1200 linear feet of edging including the driveway. The blade my gasoline edger came with was a 3 blade. It was thinner than this blade and wore out quickly. If I had known how well this blade performed compared to the stock blade I would have replaced it before I used it the first time. The cut is so much cleaner that there's no comparison. I'm going to order another one now so I have it on hand when this blade wears out.

I bought this because I couldn't find a Craftsman blade that didn't cost an arm and a leg. It's 9" and has a 1/2 inch hole, fits good and worked like a charm, so much so that I bought 2 more for spares. I have an older Craftsman 4 HP edger. I'll buy these again when I need them.

This fit my Craftsman Model 536-797571 Edger perfectly. It’s a little larger in outside diameter then the ones I have been using which I like. Works great!

This is a fine blade, very similar to the Oregon ones that sell for $1.90 less on revain at the time of my purchase. Perhaps that is because when you remove the Stens sticker you discover it actually is the Oregon blade. Even has the Oregon name and number stamped on the blade. My suggestion: buy which ever one is the cheapest.

The edges have never looked better. Just moved into this home and the people before me seldomly edged. This blade tore through the over growth with ease. Happy with this blade.

This blade is a VAST improvement over the two-sided blade that I've been using on my Ariens gas-powered edger for the last 10 years. The fit was perfect (the Ariens uses a 9" blade with a 1/2" center hole). The edge was much wider and much neater than the two-sided blade ever gave me.One caution.On the Ariens edger (and probably on ALL edgers), this blade kicks up a LOT more debris from the edging process than the flat two-sided 9" blade. YOU MUST WEAR SAFETY GOGGLES WHEN EDGING OR PREFERABLE A