Header banner
Revain logoHome Page
๐Ÿชš mm wwc 003x2 - monster master woodwork 2-piece set logo

๐Ÿชš MM WWC 003X2 - Monster Master Woodwork 2-Piece Set Review

7

ยท

Very good

Revainrating 4.5 out of 5ย ย 
Ratingย 
4.5
๐Ÿ› ๏ธ Workholding, ๐Ÿ› ๏ธ Industrial Power & Hand Tools

View on AmazonView on ะฏM

Media

(4)
img 1 attached to ๐Ÿชš MM WWC 003X2 - Monster Master Woodwork 2-Piece Set
img 2 attached to ๐Ÿชš MM WWC 003X2 - Monster Master Woodwork 2-Piece Set
img 3 attached to ๐Ÿชš MM WWC 003X2 - Monster Master Woodwork 2-Piece Set
img 4 attached to ๐Ÿชš MM WWC 003X2 - Monster Master Woodwork 2-Piece Set

Description of ๐Ÿชš MM WWC 003X2 - Monster Master Woodwork 2-Piece Set

Sold as 2 Pack of 90ยฐ Corner Clamp. The Clamp Has a 4" (100mm) Jaw Depth and Clamping Capacity of 3-1/2" (90mm). Perfect for Drawer Construction and Shelf Installation. The Innovative Design Aligns Work Pieces to 90 Degrees, while The Quick-Adjust Handle Lets You Make Fast. Helps Hold Assemblies like Boxes, Cabinets, Drawers and Cases. Classic Trigger Lock Release Securely Lock the Pliers in Place while You Work. Heavy Duty Chrome Vanadium Steel Jaws and Teeth with Premium Wear and Corrosion Resistant Nickel Plating. Strong Adjustable Clamping Force. This Angle Clamp is the Best Tool for Clamping, Mainly Used for Woodworking, Welding, Grinding and Other Processing. Made of High CRV Material and the Clamp Head is Made of High Carbon Steel by Fine Heat Treatment, which has Higher Strength. The Overall Nickel Plating is Clean, Not Easy to Break and Rust.

Reviews

Global ratings 7
  • 5
    6
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    0

Type of review

Revainrating 2 out of 5

You get what you pay for.

I do not recommend buying cheaper clamps for finishing work where it will be important. The end where it enters the pocket hole was poorly shaped and misaligned causing it to rip out the soft wood. If it weren't skewed, it would attach the joint properly. I had to buy 2 more clamps (same manufacturer from Home Depot) and had to dig through them to find the ones that weren't bent.

Pros
  • Highly adjustable clamping force. This corner clamp is the best clamping tool, mainly used for woodworking, welding, grinding and other processing.
Cons
  • Almost never

Revainrating 5 out of 5

Go with Kreg Clip

Thought it would be a cheaper alternative to the Kreg hole clamp. It was cheaper, both in price and quality. The rubber grip has already cracked and came loose after only two uses. The clamp did the job but I was expecting a little more use from it before it started falling apart. I can't vouch for the quality of the Kreg clip, but I wish I'd spent a few bucks more and gotten a potentially better product.

Pros
  • Ideal for making drawers and installing shelves. The innovative design aligns workpieces at a 90-degree angle and the quick-adjust handle allows you to work quickly. Helps to hold assemblies such as boxes, cabinets, drawers and drawers.
Cons
  • Not the best

Revainrating 5 out of 5

Essential in pocket hole assembly

Excellent clips for connecting panels with pocket holes during assembly, fit perfectly in standard Kreg screw holes. The clamping force is adjustable and keeps the purchase secure hands-free when screwing the panels together. They don't fit the Kreg Micro Jig as the hole diameter is too small for the clamp, I considered getting another pair and modifying them for the micro. I highly recommend having a pair of these clamps, I use both to hold large panels together without pocketing or movement.

Pros
  • Made of high CRV material, and the clamp head is made of carbon steel, which has higher strength, through fine heat treatment. General nickel plating is clean, not easy to break and rust.
Cons
  • Some bugs

Revainrating 5 out of 5

Ideal for power tools and hand tools

I bought these for cases where a traditional end clamp will not hold pocket screw blanks, namely when the parts to be joined are of different widths and do not sit flush on both sides. I was a little skeptical as I had never heard of this brand before, but the price seemed great compared to the Kreg clamps and the clamp depth was greater too. Overall I found them to work flawlessly and are easy to use. . An added bonus is the ease of use of the large knob that turns easily when the clamp isโ€ฆ

Pros
  • Sold with 2 sets of 90ยฐ elbow clamps. The clamp has a gripping depth of 4" (100mm) and a clamping capacity of 3-1/2" (90mm).
Cons
  • Out of fashion

Revainrating 5 out of 5

A good replacement for the expensive Kreg kit.

I recently bought a Kreg tool. Finally got around to building something big enough for the required clamps. After reading a few reviews of Kreg clips I decided to use them. I'm glad I did. I needed 2 clips for my project but didn't want to spend more than 60 euros for 2 clips. They worked like a dream. nice and hard They work like normal vise pliers and never slip. I would definitely buy them again.

Pros
  • Clamps
Cons
  • Slightly snapped

Revainrating 5 out of 5

Essential tool for pocket hole assembly

Excellent clips for connecting pocket hole panels during assembly, perfect for standard Kreg threaded holes. The clamping force is adjustable and keeps the purchase secure hands-free when screwing the panels together. They don't fit the Kreg Micro Jig as the hole diameter is too small for the clamp, I considered getting another pair and modifying them for the micro. I highly recommend having a pair of these clamps, I use both to hold large panels together without pocket hole or movement.

Pros
  • Tools and household items
Cons
  • Slightly dented

Revainrating 5 out of 5

Ideal for clamps

I bought these for cases where a traditional end clamp cannot hold the pocket screw blanks, namely when the parts to be joined are of different widths and do not sit flush. both sides. I was a little skeptical as I had never heard of this brand before, but the price seemed great compared to the Kreg clamps and the clamp depth was greater too. Overall I found them to work flawlessly and are easy to use. . An added plus is the ease of use of the large knob that turns easily when the clamp isโ€ฆ

Pros
  • Hand tool
Cons
  • Damaged