Air Intake Tube Cleaner Hose for 2003-2007 Honda Accord 2.4L | Replaces 17228-RAA-A00 17228 RAA A00 17228RAAA00 696-739 Review

I fitted a replacement hose alongside the OEM intake hose on my 2007 Honda Accord EX 2.4L EX 4cyl (sedan) and it fits perfectly. All you have to do is reuse the clamp and spring compressor from the old hose. All hose/pipe cutouts are where they should be. No white flakes or weird residue left on the product. My original hose broke due to old worn out rubber, CEL reported "fuel too lean" so I assumed the engine was getting more air than it needed. Would recommend buying.

Perfect for my 2003 Honda Accord 2.3L LX. The replacement took less than 10 minutes using basic hand tools (I'm a retired mechanic). This component does its job as intended. For those without experience, just make sure you enter the correct description for your vehicle and Amazon will let you know if it fits. In addition, some hose connections are covered and will need to be punctured (or drilled) yourself if your vehicle has special sensors installed in those locations. So before you start…

Great quality! Suitable for my Honda Accord Lx 4 cyl. 2003 It fits a little tight but was easy to install as the material is pliable. Note: It doesn't have clips so you'll have to reuse the old ones. 1) Install the inlet first. When installing on the intake side, screw this in as it is slightly smaller than the intake port. If necessary, you can heat the material with a hair dryer. 2) Install in the air chamber, be sure to reuse the spring. It's difficult to put a spring there. Use two people…