🛵 NIBBI Racing Parts Original Replacement High Performance Speed Modified Carburetor Kit - Boost Your GY6 Engine Scooter's Performance with PE26MM, Curved Pipe, Throttle Cable, and High Flow Air Filter (100CC, 125CC, 150CC) Review

carbs started immediately. It seems to drive well. Parts are not needed, the cable is long. For example for an ATV or similar. All you need is a carburetor and a direct intake adapter. I had to buy separately. Make sure you need all the parts in the package. But it seems to have a lot more power. Immediately noticed!

FITS PREDATOR 212 . Drill holes for intake manifold bolts. receive the BOLT. Get a piece of hose to make an angle to the carburetor. and cut out the paper spacer to work with the o-ring. Works great without tuning. I had to put a heavy spring in a piece of pipe to keep it from collapsing. Will definitely be buying for another project

Put a carburetor on my pit bike and after 3 minutes of running. Because of the overflow, the fuel began to piss. Thought the float was stuck. I disassembled the carburetor and found that the small o-ring covering the float needle had disintegrated. He was hard and brittle. I turned the carburetor upside down and it ripped into pieces. I could just get a lemon sitting around. I do not know. Just let you know!

I accidentally bought the wrong carb, the one for the quad and not the one for the dirt bike, the carb looks great I have it unopened in the box I'm willing to pay an extra $40 if I can get a proper carburetor i need the exact same one but for a dirt bike that comes with a shorter throttle cable and an air filter on the left hand side i wont send you all the extra hoses i have left in the rapper bring the unopened one glass back. Will you fix it so I can correct my review?

I bought this as part of a rebuild I was doing on my Tao Tao Lancer 150; The quality of the parts and everything that was included was very good for the price. I was able to fit everything fairly easily, although I had to change the orientation of the carburetor due to the frame (which I couldn't change as it was the main engine mount) not allowing it to sit properly. One downside is that if you don't know where your gas and vacuum lines go, these might be difficult to install as there are no…