🚜 Nilight ZH002 Off-Road Led Light Bar Combo Kit - 20Inch 126W Spot Flood, 2PCS 18w 4Inch Spot LED Pods, 16AWG Wiring Harness - 2 Years Warranty Review

I have added silicone to the diffuser and all the screws. I can say that it was necessary to protect against water. never mind My kit included a pre-wired relay and switch to turn on the bar light and two taillights. I removed a push button switch and added another relay and added two toggle switches. I also added an extra length of pre-routed cable to ensure I had enough cable from the back of my Yukon to the front. Thanks to another reviewer for the tip. I also added a product called "Add a…

I bought these headlights for my 2015 F350 SuperCrew Long Wheelbase Pickup. The two smaller 4" headlights I installed as backup lights and attached to my headache rack. A 20" rod was attached to the front brush guard. The wiring harness that came with it was good (and probably works fine), but I don't have it in my application used as the harness wires are too short. They would probably fit a small quad or compact car, but not a full size pickup where the cab floor alone is almost 8 feet long…

Update: Check your local and state laws carefully! You may need to mount them in a specific location and/or put on caps while you're out and Nilight told me they don't know of any caps that fit these lights! (В Пенсильвании, со сборами, ваш билет будет стоить 218 долларов за то, что они не покрыты. Спросите меня, откуда я знаю) Поместите их на мой Chevy Blazer 2000 года, модифицировали и установили на бампер, и они, кажется, отлично работают so far! I call them my FU headlights for all the…

Got this set as a gift and live it! Before proceeding with the installation, you must go through the product and make sure that all screws are tight. Many dangled from the lifting bar. Then do yourself a favor and place silicone on all exposed edges, including around the glass where it connects to the case! This will help reduce the moisture problem. I gave this product a 3 for moisture resistance as many of the screws were loose and allowed moisture to get into the LED bulbs. It was so easy to