Patriot Memory VIPER STEEL 16GB (8GB x 2) DDR4 4133MHz DIMM CL19 PVS416G413C9K Review

It started right away in the 2nd xmp profile at a frequency of 4000 and works very stably (my mother keeps memory at 4030 in this profile). The first profile turns on at 4133, but in the test, Aida gives errors. I’m sure a knowledgeable person will be able to slightly correct the timings or the voltage and memory will work stably and at such a frequency, but I don’t know how to do this, and I don’t need it at all. I have an msi z390 gaming pro carbon mother. I bought this RAM in order not to…

Bought on aliexpress, two sets. I'm very satisfied, Samsung b-die chips, 4 sticks run smoothly on i9 4000_15_15_15_30 1.48v, 4266 18_18_18_ 36 1.52v Good timings! If you put the blower on the RAM, then you can choke it more strongly, these chips keep a high voltage under the condition of good cooling, for example: 1.5-1.55v on the drain is often found on trident z. On the forums they write that 1.8v is only with good cooling, the voltage does not matter, the temperature of the chips is…

Good memory with good overclocking potential. Managed to conquer 4133 16-16-16-34. Some pros: 1. Overclocking potential (good heatsinks and Samsung B-Die chips) 2. Price (7700 for the promotion, well, this is a gift) 3. Packing Cons: None at this price. ) And so, not the best radiators, G. Skill Trident Z will have better ones.

mother acrock z390 phantom gaming ac Memory full of course) two pieces of useless G . iron. Tired for a day of her Settings. As a result, the verdict for me, it does not work at all. Hmr didn't start. 4400.4130, 3900, 3700, 3600, 3300, 3200 does not take either at all or is not stable, sagging in games friezes on the desktop. The timing set different high and low, it doesn’t work. I added and reduced the voltage. Secondary exhibited, according to the tables. 2999 is stable but why should I? My

I bought 2 sets, a total of 32 gigs, it didn’t start on xmp, if you leave one set, that is, 16 gigs, then xmp works, but delay the high ones, I’ll try to start all 4 dice at a more or less normal frequency, but advice from me if you don’t want to suffer or not sure about your hardware, it’s better to take a RAM with a lower frequency and not overpay, since before that I used the usual crucial without radiators, there was a 2-rank 16 gig bar in the amount of 32 gig, and there were no problems…

Assembly on b660 with i5 12500 I set the frequency to 3600 so as not to switch to Gear2, everything worked fine, but a month later the games started freezing, I began to find out the reason and found RAM errors. Reduced the frequency to 3200 CL14 So far, it works stably, perhaps the frequency can be set higher, but you have to tinker : achieved frequency 3333 with timings 14 14 14 35 I think this is a good result. Definitely worth the money, at the time of purchase it was 8500 per set

On the msi z370 pro carbon 8700k board, two sets work fine, 4 memory sticks at a frequency of 4133 MHz with 19-19-19-39 voltage 1.45. Which is not bad for 4 bars, and 4 is known to run worse than 2. Xmp at 4000 MHz worked great. I tried 4400 MHz, but in the tests there are errors, you have to conjure with timings. In general, an excellent memory for those who like to scratch the computer, and for those who do not like, you can also turn on the xmp profile. On two bars, I think both profiles…

They work unstably at a frequency above 3600 on the MSI B450M PRO-VDH MAX motherboard with Ryzen 5600g, although vipers on hunixes that are 2 times cheaper stably keep above 4000, strange .

The stock frequency is 2133, on the motherboard ASUS B660M wifi plus D4 it was possible to overclock only up to 3600. Everything above produces a blue screen of death and refuses to work =(

I will test and add a review a little later. Some pros: Price, design does not have stupid highlights, cooling radiator, high speed. Cons below: At the moment there are none, I have not tested it yet, after the tests I will add a review

On a computer with a Ryzen 7 Pro 4750G processor and a GigaByte B550M motherboard, the S2H started up on XPM profile 2 at 4000 MHz. After ating the BIOS to version F12, XMP profile 1 works stably with a frequency of 4133 MHz. The timings are of course too big, but the voltage is 1.38 volts. All my attempts to overclock were no longer successful. The most likely reason is the cheapest motherboard based on the B550 chipset. Most likely on more advanced boards you can squeeze out more.

I bought two sets, installed 4 dies at once. It starts on xmp, without problems, chases, left it almost as it is, only slightly lowered the timings, I think you can fine-tune it, but I'm too lazy for now. Works great at 1.45v stably, no errors, tests pass