🔆 PAUTIX 24ft Dimmable DC24V Warm White COB LED Strip Light 3000K - High Lumen Tape Lights Kit with RF Remote Timer Function and Power Supply for DIY Lighting in Home, Bedroom, Kitchen Review

Versatile and incredibly compact. Light levels (from 5% to 100%) and modes can be easily adjusted with the remote control. The tight arrangement of the LEDs on the strip gives an even light over the entire length. The remote works right through walls and cabinets, allowing the power supply and control module to be hidden if desired. LED strips can be cut every 2 inches. Very important.

Light up 3 zones in our kitchen with 2 of these sets. I bought an extra remote control so I can set up individual zones in our kitchen. 3000k works great with our kitchen lighting. I had to buy a few extra plugs and adapters and a spool of bell wire to route and hide the wiring. Just keep the right orientation in your country and a positive attitude and everything will be fine.

I bought COB bulbs to do under cabinet lighting and I was impressed! The cabinets I was working on didn't have room for any type of mounting bracket, so I went with these brackets hoping they would reduce glare on the counter. Even though they were more expensive, the light they produce is 100x better! These lights are all I will be buying now as they come with everything you need to do a professional looking job. Good light output, 3m film with back, low glare, dimmable, what more could you…

I love how "neon" they look on my Christmas tree. This is how I imagined my tree. Easy to use, stick and connect. Will be updated next year. Update: The adhesive is easy to remove and replace with new 3m reusable tape. I didn't want to leave the light on the tree for fear of dying in the attic in the Texas summer. Instead, I turned them into cabinets. 100% light is good for making sure counters are clean, but we leave it on at 25% or less throughout the day. still love her! Sooo easy to put on…

Я читал в вопросах и ответах, что эти элементы прикрепляются, чтобы вы могли соединить несколько нитей вместе, но, похоже, вам нужно купить еще одну часть, чтобы сделать That. to connect them. They're not ready to band together. So I sent them back and bought a longer strand. I need about 20 feet, so I wanted to use two 9.84 foot strands. A 16 foot skein is too short and a 24 foot skein is too long. To update. I returned them for the 24ft thread but when I received them they didn't have a power

Bought four to install in the salon around the mirror stations which gives really good light around the face and a good working light in front of the mirror. After installing it, I realized I needed to test before spending all that time installing. I didn't think I needed to look for dead zones in LEDs. Guilty! Now I've installed it with a dead center on one of the stations... 😕 what a shame, I really like the light and overall I'm very happy with the product. I definitely love the fact that I

Customer service was great. I have emailed several times what parts I need and they have been very helpful. I installed a small flat head, scissors and needle nose pliers to connect to the W pin adapters. My cabinets have outlets in each section, so I separate the Y-cable power supply from the power supply after the remote cable. I ran the wires from the bottom and top and then connected the light strip. I have a Meross home socket in every outlet, so at night I tell Siri to turn on the closet…

I bought this brand because another brand I use around the house was sold out here at Revain. I hooked it up with the supplied transformer and driver and dimmed it down to 25%. I just noticed that it looks very bright at 25% but I proceeded with the install as it looked good and the color temperature matched my other warm white stripes. They were installed in a small Dato cutout with wood paneling and a 1/4" thick acrylic strip to diffuse the light. I installed two strips on each side of the…