Header banner
Revain logoHome Page
⚡ optimizing power distribution with the module position strip logo

⚡ Optimizing Power Distribution with the Module Position Strip Review

4

·

Very good

Revainrating 4 out of 5  
Rating 
4.0
🔌 Wiring & Connecting, 💡 Industrial Electrical

View on AmazonView on ЯM

Media

(4)
img 1 attached to ⚡ Optimizing Power Distribution with the Module Position Strip
img 2 attached to ⚡ Optimizing Power Distribution with the Module Position Strip
img 3 attached to ⚡ Optimizing Power Distribution with the Module Position Strip
img 4 attached to ⚡ Optimizing Power Distribution with the Module Position Strip

Description of ⚡ Optimizing Power Distribution with the Module Position Strip

Working voltage DC 0 to 32V. Maximum total input current 30 Amps. 6 Channels output, each channel maximum output current 3 Amps (Factory-installed fuse value 3 Amps, you can replace the fuse to support up to 10 Amps.). Input terminals pitch 7.62mm/0.3", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw. Support power supply expansion connect to other modules. Output terminals pitch 5.0mm/0.197", wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw. Fuse holders for Medium Blade ATO/ATC Fuse, the fuse can be removed and replaced very easily. With fuse fail indication function, when you connected load and the fuse has blown or has been unplugged, fail indication LED will turn on. FR-4 fiberglass dual copper layers PCB. High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm rail.

Reviews

Global ratings 4
  • 5
    0
  • 4
    4
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

Port 1 has failed. Ports 2 through 12 are working.

Port 1 has blown. Fuse on port 1, power is still present .Don't know what the problem is, Also when I add a 12V load on port 1, the voltage drops to 4V.

Pros
  • Output terminals, 5.0mm/0.197" pitch, 26~12 AWG wire size, 7mm stripping length, M2.5 metric slotted screw.
Cons
  • Available in white only

Revainrating 4 out of 5

Used for DIY CNC table

Used this block to distribute power to stepper drives and other controls on a homemade CNC table. Item well assembled. Would have liked a cheaper option that didn't come with fuses. Most of the fuses have been removed and replaced with fuses sized for my application.

Pros
  • Input terminal pitch 7.62mm/0.3inch, Max current 30A per position, Wire size 26~10AWG, Stripping length 8mm, M3 metric slotted screw. Support power supply expansion to connect with other modules.
Cons
  • Concise Manual

Revainrating 4 out of 5

Port 1 has failed. Ports 2 through 12 are working.

Port 1 has failed. Ports 2 through 12 are working. If I pull the fuse on port 1, the voltage is still there. I don't know what the problem is. Also when I add a 12V load on port 1 the voltage drops to 4V.

Pros
  • Nice to use
Cons
  • old

Revainrating 4 out of 5

Used for home build CNC table

Uses this unit to distribute power to stepper drives and other controls on a home build CNC table. The product is well constructed. I would like a cheaper version without fuses. Most fuses have been removed and replaced with fuses suitable for my application.

Pros
  • Constant test results
Cons
  • A newer model could have been chosen