💡 Stageek 6 Ft Floor Cord Protector: Flexible PVC Duct Cable Concealer for Home, Office or Warehouse - Prevent Trip Hazard! Review

I have used a similar product before and while not impressed I put up with it. When it came time to need this type of product again, I researched further and came across Stageek. What I disliked most about the previous product was that it rolled up and didn't lay flat no matter what I tried. The Stageek product arrived rolled up but when I took it out of the box I noticed that it was very heavy. I unfolded it and almost immediately it lay almost flat. I started my project, cut it to size…

Stageek 6ft floor cable protector - flexible PVC I bought this Stageek FCP to protect Cat 5 and Cat 6 cables from foot traffic and I need enough space in the duct to join Add at least one more Cat 6. It's doubtful I could have designed them better myself. Decent sized hole at the bottom. It's easy to run Cat 5 and Cat 6 in one channel with lots of free space. The lid I received had a slight crease on each end. I expected this because I knew it would be shipped rolled. No problem. While the user

Bought to run the hybrid charging cable across the pavement to my car. I wanted something that would make traveling and working outdoors less dangerous. It fits and works great! It is regularly exposed to the elements and has not faded for several months. We'll see how it handles the winter weather soon! It is true that it comes in a twisted state and takes quite a while to settle down and STAY flat. First I had to pin the ends to keep them down and in place. (I used a brick on one end and some

It takes a little patience. Love the fact that it finally lays flat after soaking in hot water for about 10-15 minutes. You will need to bend it slightly after soaking before it cools again. It also took a few days to mostly lay flat before soaking. It comes rolled up. After delivery I cut the zip tie, unpacked and laid it on a rug with some heavy boxes for a few days. After that, the ends still had to be soaked, which worked well. My setup includes two reinforced Category 6 shielded Ethernet…

The ends never loosened enough to lay completely flat. I had to cut one of the ends about 4 inches to fit the area I wanted. If you are cutting this I would split the cut length and take it off both ends. Maybe during the manufacturing process they rolled it tight for shipping before it had fully cooled/cured. The PVC on the rest was fine, but not quite as "ready" to lay as perfectly flat as the silicone product I later bought to replace. The silicone product also has more slip resistance. I…