💻 RGEEK Mini ITX Computer Case PC Case HTPC with Holes, Aluminum Top Cover Review

The inside of the power button is connected to the bottom plate. Once the motherboard is installed on the bottom panel, it is very difficult to install the back case. The USB ports are mounted on a hard drive tray that covers half of the top vents. I don't use hard drives (m.2 only) but still can't remove the tray. From the outside it looks very high quality and great. Fits a standard AMD cooler (3200g) and stays cool without additional case fans. I wish they had thought a bit more about the…

case is good no instructions or photo posts along with wrong parts listed by Revain as they were often bought together has misled me. Findings: The housing is very small and does not fit all common coolers. Doesn't seem to fit the SSD, use an NVME hard drive attached to the bottom of the motherboard for better airflow. I recommend the power supply, because often bought together, it does not fit. Build - CPU/GPU: Ryzen 5 3400G Cooler: Noctua NH-L9a 37mm Low Profile RAM: 16GB 3200 DDR4 Patriot…

I have built many computers in my time and this was the most difficult case to install a computer. However, the end product was worth it. . Technology has advanced to the point where we only need a suitcase this size. M.2 drives are great and reduce the PC form factor significantly. At the same time, I had to completely disassemble this case, cut out the metal edge, drill 2 holes to install the power board, but it was worth it. I like the result and I like the way this case looks. The computer…

I bought this to build an HTPC mini-ITX based on an Asrock B450 Fatal1ty ITX motherboard with a Ryzen 5 3400G processor. This black case looks beautiful. Very similar to the Mac mini. The power indicator is light blue, but that doesn't bother me even in a dark room. Simple aesthetics, goes well with other AV equipment. The case has appropriate screws to attach the motherboard and other peripherals. The description says it fits 2 50mm fans for which I used 2 Scythe brand fans. To attach the fans

Bought this case while waiting for my HDPLEX 200W DC-ATX power supply to arrive. I was disappointed to find that this case is completely incompatible with this nanoPSU, the power supply clashes with the circuit board holding the front power button, and there is no hole big enough for the power plug on the back. There's also no internal space for a DC-DC board, so it only seems to be compatible with RGeek's picoPSU, which should really be mentioned in the product description. In addition, this…

Great little case for my Mini-ITX device. Excellent ventilation. Nothing fancy, no flashing lights - just a small blue LED on the front. Super Compact: You'll likely have to shell out money for a low-profile fan like the Noctua, and it will take some origami to attach the cables. Well done: The only minor downside is that one of the (very small) screws attaching the bottom to the case is *not quite* aligned, but it's ok if three of the four are secure.

The two motherboard mounting points did not match the holes on my motherboard. I have an ASRock B450 Fatality ITX board. So there are some issues with the measurement, but that doesn't matter to me. Nevertheless, I am satisfied with the processing quality of the case and the good ventilation. I also mounted an M.2 SSD on the back of the motherboard and it has air holes under the case so it's good for people who want to mount an M.2 SSD on the back. would fit the stock cooler on my AMD Athlon…

works great for me! very little noise and I leave it on 24/7. I recommend buying a more powerful power supply than the one recommended by Amazon. In general, if the pico power supply is rated at 160W, you need a larger power supply or you risk drawing too much power from the power supply and it can get very hot. Here are my specs: RGEEK pico psu 160WLED. adapter 12V 20A 240Wasrock x470 fatality itx/ac16gb ram dddr 3000sunbow sata ssd 240gb sata ssd blocks the flow of heat so the case gets a…

This bag is perfect for my needs. Paired with a mini-ITX board, micro power supply and nVME drive; it houses a fast and quiet system. I am very impressed with the looks and solid construction of this case.