Dome Map, License Plate & Trunk Tail Light T10 194 Bulbs - 12pcs, Super Bright White LED 2825 W5W 175 168 Bulb for Enhanced Visibility Review

Excellent LED replacement for my T10 interior lights in my car. For $10 I was able to replace all the incandescent lights in the cabin with LEDs. It would have been a $185 dealer option. I wish they were a little lighter, but that may actually be the result of the translucent lenses versus the clear lenses on my other car.

They are of poor quality to begin with. Modern design initially gave the impression of quality and durability, but that is not the case. One literally fell apart when it came out of the bag. One or two didn't light up. One broke after a few months of use. Big pack of 12 bulbs, but if one breaks and the other fails after a few months, what's left for me? Not recommended!

So far I like these new bulbs. I can't comment on durability as I've only had it for a week. But unlike previous generations of LED lamps, they easily fit into all car sockets. They are bright white and do not flicker. I wish they had somehow marked polarity because as stated on the product description page you have to remove and rotate half the time for them to work properly.

I bought another set of LED bulbs at the same time as these and whilst they are not as bright I would say they are perfect for most occasions where the interior lighting is a little in your eyes or even too strong is disgusting . I only bought them at first to use later in my license plate as they seem to seal better than some other bulbs and put out a good amount of light. I have used these lamps in several places instead of the brighter ones.

In less than six months I noticed the bulbs were flickering and their clear plastic covers had been removed and were rolling into the flashlight housing. I had to remove the case, shake and twist to get it out. I have checked all the lightbulbs in my car and they are all loose and will come loose soon. This is a good lamp as it is a bit smaller than a regular LED lamp. An ordinary lightbulb comes too close to the plastic housing, which becomes very hot from the lightbulb. I will use a different

First, the packaging of these led bulbs is very simple and well organized! I like that there are instructions on the front if there is a problem with the backlight. I will say that I definitely see a difference before and after another brand's LED bulbs. They are much brighter! These lamps are well built and have a solid body. I didn't have to install resistors in my setup, but I did in any LED product you might need. For the process, these lamps are a great addition to the interior or exterior

I bought a set of 10 LEDs and put them in a weekend machine (as that machine is rarely used) and fried 2 out of 10 bulbs in less than one Year. To put this in perspective. The lights in the car have to be on (at night) and I only drive this car on weekends (not that often at night). So I would approximate the total run time to less than 150 hours and they failed. It is not possible to contact them and replace it with Revain. Revain CS will issue you a credit and you must purchase the Revain…

Used for side lights to accompany my bright white LED fog lights as Daytime Running Lights (DRLs) on my RAV 4 looks like a Daihatsu here in Japan. Both the DRLs and the "parking lights" (with headlights during night driving) were used an average of about an hour per day, plus two "on and off" times per day. all 12 packs in 15 months. They burn out quickly (less than two months on average). as soon as it could be if discovered. Not recommended unless you really enjoy swapping out the same items…

T-10 lamps. I bought them to fit into some of the DRL sockets on the aftermarket headlights I bought. These bulbs are no brighter than the ones currently in use, but the main difference is that these bulbs emit most of the light at right angles to the bulb and not straight up like I was hoping. Your install was actually a downgrade so I'll be returning it. I bet they would be a good replacement for applications where the light needs to come from the side of the lamp, replacing incandescent…