USB Type-C HUB ELfoC LM3123-69-11 Super Combine Hub 11 in 1 Hub USB3.0x2 USB C Data Function USB C PD RJ45 HDMI 4K30Hz VGA SD 3.5mm Audio Review

Super Combine Hub 11 in 1 Splitter Hub USB3.0x2 + USB2.0x1 +USB C Data Function+USB C PD Function+RJ45 Task Force (100Mb )+HDMI(4K30Hz)+VGA (1080p)+SD2.0+ TF2.0+3.5mm AudioJack. Connect to your laptop all the necessary devices at the same time in one motion. Smart design: high data rate (up to 10Gbps), image quality (4K/60Hz) and fast charging (up to 100W PD, QC). Every year, manufacturers reduce the number of USB ports in a laptop. Laptop cases are becoming thinner, and it becomes impossible to place ports in 2 rows. Modern laptops usually have 1-2 USB Type-C or USB3.0 ports. A huge amount of peripheral equipment is connected via USB: mice, keyboards, printers, USB flash drives, monitors, projectors, etc. The solution to the lack of USB ports in a laptop is the versatility of the USB port itself, in addition to supporting various equipment, the USB port also supports expansion using a USB hub. It''s like an electrical power strip with outlets where you plug it into one outlet and you get 4, 6 or more. It is the same here, from 1 USB port you can get from 2 or more. Also, in addition to additional USB ports for a laptop, the USB-Hub contains additional connectors, for example: Network card, card reader, output to an external monitor, etc. Given all the variety of computer peripherals, it is logical to think that computer motherboards should have enough USB ports to connect external devices. In fact, there are moments when ports start to be sorely lacking. The hub connects to a free port of a laptop (tablet, smartphone) and provides additional connectors. A driver for the device is usually not required, and after connecting the USB hub, it is immediately ready for use. USB hubs can be divided into two groups: passive and active. Passive splitters are powered by the motherboard (laptop) and are more suitable for connecting mice, flash drives, memory cards that do not require high power (1-7 W). To connect a portable HDD to a computer or to power and charge external devices and gadgets, you need an active Hub with additional power from a 60-100 W adapter, for example, ELfoC PD-65W GaN QC 2-Port USB-B+C ELfoC hubs are by default Active, because they have a USB Type-C power connector. They are more reliable and more expensive than passive hubs, as they are able to maintain a stable power supply to all ports, thereby preventing the risk of accidentally turning off the device. Each hub connector is equipped with a separate chip (or several) for each type of connector. Thus, ELfoC HUBs can be called smart devices, since the built-in controller chips are responsible for proper communication and voltage matching of the connected equipment. Recommended for purchase in a set with a mains charger depending on your need for power: Mains charger ELfoC PD-65 GaN and ELfoC PD-30W GaN