VIAIR (00016) 6-Foot Portable Compressor Air Hose Extension Review

Tested and working well. Use with a Viair 88 compressor is 120psi. They are a good match. The threads seem to be holding up well - very good quality compared to other hoses. Both the hose and the compressor are of high quality. They were long gone but a good test on 4 truck tires came out very well. Strong buy recommendation if necessary.

My Solowheel unicycle has an extremely difficult to access inflation valve that will not work with most bike pumps. I tried to solve this with a metal valve extender but it was causing weird problems such as: B. the unintentional deflation of the tire during inflation. This led me to this valve extender. It worked great. It hooked up easily to a hard-to-reach valve and gave me enough working space to hook it up to my bike pump. No leaks. The perfect pump.

I've spent too much time and money on an air hose that doesn't have two female ends. My air source is the male end - the hose has a female end which is sticky but the other end is male just like ANY OTHER CONNECTION YOU CAN BUY. Requires 8V1 Female to 8V1 Female Coupling and NO ONE SELLS THIS COUPLING. It's unlikely anyone can find out where the 8V1 Female coupler is sold on the 8V1 Female. I will buy TWO!

WRONG PRODUCT DESCRIPTION BUT NOT RETURNABLE?!? -- The product description says "Portable Compressor Air Extension Hose" but this does NOT apply to a "portable" air compressor (which typically uses 1/4" hose and 1/4" threaded fittings). I know this because I have six different sized "portable" and "personal" air compressors for small jobs and to take with me in my cars/trucks, and I also have a 60 gallon stationary air compressor for larger jobs) . This hose is for a "personal" (or mini) air…

I have used this extension hose and bike floor pump to add air to several items around the house. This comes in handy when you want to add air to your car's spare tire without removing the tire from the car. I also used an extension hose and floor pump to add air to the expansion tank that is connected to my water heater. Six feet long was just what I needed. The male fitting on the hose must be connected to the pump before the female fitting is screwed onto the Schrader valve or you will lose…

Large Hose. This isn't a standard Schrader extension, but maybe if you add a small Schrader extension. It is designed for small tire pumps with a screw connection to the tire. The female end is a standard connection that goes to the bus. valve stem. The valve stem is standard tire valve threads on the outside, but not Schrader valve core threads on the inside. If you add an inexpensive tire valve extender it will work just fine. (These are available from Revain and possibly some auto repair…

I bought this to replace my Husky 12v pump. It was a good cheap hose replacement and saved my inflator and extended its life. On the plus side, it fit well and I was concerned about the sizing variance. Also, this hose is much longer than the original hose, so more convenient. On the other hand, the original hose had a rubber ring around it to prevent air leakage. This one didn't fit and the original didn't. Without them, you can still use the inflator, but it loses some pressure. Second, on…

I bought a blue ARB ARB605 blower with gauge and braided hose that turned out to be a disaster. The cartridge did not stay on the tire nipple. I had to hold it with both hands and it still leaked. To solve this dilemma, I purchased a 6 foot Viair portable compressor extension hose (00016) that had a male schrader valve on one end and a female schrader valve on the other end that threaded onto the valve stem. I used the ARB adapter from the kit I had, Craftsman 11pc. Air Compressor Accessory Kit

I use a bike pump and digital pressure gauge to inflate car tires. Standard lever linkages on bike pumps, like the acclaimed Schwin, have become large/obnoxious/bulky/heavy for use on car tires. In some cases, depending on the length of the valve stem, installation was not possible without removing the caps. This hose solves the problem. One end is exactly the same as the Schrader valve in the car, so I attach a bike pump to that end first. I do this first as this hose is basically an extension

The purpose I bought this for is to replace an old leaking hose on my 35 year old MDI/Meidai bike floor pump that I use Schrader to inflate tires manually. valve filler. This new hose has standard Schrader valve threads on both ends; a man on one end and a woman on the other. I cut off the male end I didn't need to connect to a barbed hose connector on a bike pump. The inner diameter of this new hose is 1/4 inch which is exactly what I needed and is the same as the old hose it replaces. This…