Header banner
Revain logoHome Page
๐Ÿ”ง enhanced xspc easy cut/easy bend petg liquid cooling tool kit logo

๐Ÿ”ง Enhanced XSPC Easy Cut/Easy Bend PETG Liquid Cooling Tool Kit Review

4

ยท

Poor

Revainrating 3 out of 5ย ย 
Ratingย 
2.8
๐Ÿงฐ Computer Internal Components, ๐Ÿ’ป Computer Components

View on AmazonView on ะฏM

Media

(4)
img 1 attached to ๐Ÿ”ง Enhanced XSPC Easy Cut/Easy Bend PETG Liquid Cooling Tool Kit
img 2 attached to ๐Ÿ”ง Enhanced XSPC Easy Cut/Easy Bend PETG Liquid Cooling Tool Kit
img 3 attached to ๐Ÿ”ง Enhanced XSPC Easy Cut/Easy Bend PETG Liquid Cooling Tool Kit
img 4 attached to ๐Ÿ”ง Enhanced XSPC Easy Cut/Easy Bend PETG Liquid Cooling Tool Kit

Details

Item Dimensions LxWxH7.09 x 4.33 x 1.97 inches
BrandXSPC
Cooling MethodWater
MaterialRubber, Polyvinyl Chloride

Description of ๐Ÿ”ง Enhanced XSPC Easy Cut/Easy Bend PETG Liquid Cooling Tool Kit

Heavy Duty Hose Cutter - The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw. PETG Easy Bending Tool - This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing). Bending Rubber - Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm). PETG Chamfer Tool - Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise. PETG Edging Sandpaper - Ideal for sanding the edges of PETG tubing, after using a chamfer tool.

Reviews

Global ratings 4
  • 5
    0
  • 4
    2
  • 3
    0
  • 2
    1
  • 1
    1

Type of review

Revainrating 4 out of 5

You get what you pay for

Cheap silicone tubing melts in every tubing I bend. On low heat, 8 inches from a blow dryer, the curves came out great, every time I removed the tubing it stuck to the inside wall of the PETG. On the fourth, it was torn in half. For example using line oil to create a barrier between hose and hose to ease removal but to no avail. The deburring tool is cheap and leaves jagged edges that are not smoothed out with sandpaper. The cutting tool works well, but the blade is sharp and easy to cut. Theโ€ฆ

Pros
  • Basic PETG Bending Tool - This tool makes it easy to bend PETG tubing from 0 to 180 degrees. Simply heat the tube with the bending rubber inserted, insert the tube into the tool and bend to the desired radius. This simple tool takes all the guesswork and hassle out of bending rigid tubing. (Fits 12-14mm OD tubing)
Cons
  • Wrinkled

Revainrating 4 out of 5

The set is excellent but the rubber insert is not good.

I bought it mainly for bending and cutting, both of which I really like (5 stars). A pencil sharpener style bevel tool is fine. It works if you don't push too hard. Too much pressure and you'll end up breaking/chewing the end of your tube. (4 stars). The rubber insert is beyond useless. DO NOT USE THIS. It melts at a lower temperature than the hard XSPC tube softens. The first one I did (near the end of the tube) worked fine. The second (closer to the middle) is stuck. I managed to get the tube

Pros
  • PETG Beveling Tool. This handy tool allows you to quickly bevel the edges of PETG tubing. Simply insert the tube and twist counter-clockwise.
Cons
  • too blunt

Revainrating 1 out of 5

If possible, look for something else.

The angles on the bender don't include a 45 degree mark which I think should be included. I actually stopped using the bending tool because I found it was too tedious. I couldn't get the pipe cutter to ever cut the pipe cleanly. Always cut at an angle which was annoying. I tried cutting a variety of ways but couldn't get an even cut. The insert is not very good. Even with soapy water it was almost impossible to pull the liner out of the 90 degree bend. I had to pull so hard on the pad that itโ€ฆ

Pros
  • Bending Rubber is a solid rubber profile for bending PETG pipes. Insert into the tube before bending to prevent the PETG tube from being bent or deformed. (Rubber bend diameter 10mm)
Cons
  • Some small things

Revainrating 2 out of 5

No quality control; Damaged rubber bonded cord

No quality control and I don't make this comment lightly; I use many other well made XSPC products. The only decent tool in this pack is the chamfer. The first thing I noticed was that my pipe cutter set is unevenly hard on the inside (along the curve where the pipe lies), so it cuts at an angle. Most importantly, the molded "rubber compound" cord has a very low melting point compared to REAL silicone cords; it melted at low temperature inside the XSPC-PETG tube. Once I made the bend (rememberโ€ฆ

Pros
  • Heavy Duty Hose Cutter - The heavy duty hose cutter cuts PETG tubing as easily as flexible PVC tubing. Easily cuts tough PETG tubing without the need for a saw.
Cons
  • Exchange availability