Youxmoto 3rd Brake Light: Rear Cab Roof Center High Mount Tail Lamp for Ford F-150, Ford Explorer Sport Trac & Lincoln Mark LT (Black Housing Clear Lens) - Fits 2004-2008 F-150, 2007-2010 Sport Trac, 2006-2008 Mark LT Review

Very easy to install, works and looks great. The color does not match the original, but is still acceptable. The reason I gave it four stars is because it has to come with a gasket. Be sure to carefully remove the old gasket, not always easy, in order to transfer it to the new bracket.

The original on my truck had a broken lens and I was afraid it would leak. They were very easy to install, bright and look great. Second, to understand that all I had to do was take the bulbs out of the sockets and then connect the wires to the new one, right where the bulbs hung. I just thought it must be harder than that lol.

Live that light. The old world was destroyed because it was so fragile. This light shines at night. I can't remember when the back of the truck caught fire. Ease of installation. I used tape around the connectors to secure them in place and protect them a bit. The connectors reminded me of old Christmas garlands that were connected with two wires. Once you set it up properly, everything works.

The light bar looks like it has a red lens in the middle. However, when the price arrived, the lens was completely clear and the reflector was completely silver. The only reason the color is coming from the red LEDs is when you apply the brake. It's not a bad product but it looks redder in the photos than what came. There is a picture and brief description that says silver and clear but there are 4 other pictures that show red well. A little misleading.

I bought in February 2020 for a 2007 F-150 STX and this is what I got, all three lenses are transparent outer lights are white leds and the center light is a red led which Wiring consisted of three pigtails connecting to your existing sockets, a double sided 3M foam pad which once fitted does not appear to be removable without tearing and two small rubber washers for use with your original screws. My existing sockets are heat damaged and I was expecting the wiring to be a plug that would fit…

This is a beautiful lamp that works great. The OEM wiring harness does not require an adapter - you just need to get to the connector. My F-150 has two plastic ceiling mounts in the cabin that can be easily removed with pliers to expose the wiring. You pull out the wiring, then plug it in and work. It took longer to clean the area around the old lantern and put the sealant on the double sided tape than it did to connect it. The process was easy. And I'm happy with his looks. You too will be…

Very well packaged. The LED lamp has connectors for connecting to existing light bulb sockets. The kit also included a new foam gasket. To remove the old lamp assembly: Remove the 2 Phillips screws, rotate each lamp assembly 1/4 turn counter-clockwise and remove the 3 lamps and sockets. Remove the old headlight assembly. Clean the area to remove dirt and debris. Remove the pad and attach the gasket to the new light. Connect the three plugs to the lamp sockets. *IMPORTANT Check the operation of…