💽 Hard Drive Accessories
4 Review
Larger Storage Space : The internal structure was optimized to increase the capacity. Suitable for storing most brands and models of voice recorders (Internal size: 5.4*1.8*0.66 in). Please Check and Confirm the size before you buy. Better Waterproof and Dust-proof Performance: EVA material combined with nylon case exterior strengthens the closure…
Read more about this product
4 Review
Read and write four hard drives simultaneously. Tool-free installation. Transfer speeds up to 5Gbps. LED indicator for power and HDD access.
4 Review
SUPPORT: Most 3.5inch USB3.0 Type-A HDD or 2.5inch 7/9.5mm with adapter HDD/SSD. 16TB MASS SPACE of A SINGLE DISK: WS single disk supports for 16TB hard disk expansion. The SATA 3.0 6Gbps master control scheme in the honeycomb series can support the UASP acceleration protocol, which can effectively improve the rate by about 20%. CONVECTIVE HEAT…
Read more about this product
4 Review
Support 2242 Form factors of B Key M.2 SATA SSD. Premium all aluminum exterior with small, pocket able Design. Latest USB 3.1 Gen 2 interface up to 10GB/s Super Speed transfer rate. Robust USB Type-A interface and no driver Installation Required. Retractable USB connector design. Product only supports SATA III M.2 drives. Please ensure that you have…
Read more about this product
4 Review
USB 3.0 Interface up to 5Gbps Data Transfer Speed. Supports 7 to 9.5 mm Drives. Compliant with SATA 1.5/3/6 Gbps Hard Drive and SSD. Powered by USB Port. Pocket Size for Easy Transportation. Compatible with Hot Plug. Transmission Rate: USB 3.0 Up to 5Gbps; USB 2.0 Up to 480Mbps. Compliant with SATA 1.5/3/6 Gbps Hard Drive and SSD. Supports 7 to 9.5 mm…
Read more about this product
4 Review
【High Transfer Speed】The M.2 NVME drive enclosure employs M.2 NVMe and USB-C 3.1 GEN2 technology up to 10 Gbps to give high-speed data transfer rates. Only for M.2 NVMe PCI-E M key, PCI-E B&M key SSD(sizes 2230/2242/2260/2280). 【Easy to Install】It uses a slide mechanism to remove the casing instead of the screws in the market to make it easy to install…
Read more about this product
4 Review
M.2(Ngff) to SATAIII card. M.2 Specification Revision 0.9. Serial ATA Specification Revision 3.2. Supports M.2 card sizes: 2230, 2242, 2260. Supports M.2 B key card Type. M.2(NGFF) to SATAIII Card. M.2 Specification Revision 0.9. Serial ATA Specification Revision 3.2. Supports M.2 Card Sizes: 2230, 2242, 2260. Supports M.2 B Key Card Type. Supports…
Read more about this product
4 Review
5-bay RAID storage, compatible with 2.5"/3.5" SATA hard drive or SSD, supports 18TB hard drive, total capacity up to 90TB. (Note: users need to purchase their own hard drives. These are not included. Unique 2+3 RAID mode: hard drive #1 & #2 can be configured as RAID 0, RAID 1 or Single disk. The remaining drives #3-5 work as single, independent drives…
Read more about this product
4 Review
【Truly Immersive RGB NVMe Enclosure】From the newest battleship design to the RGB fusion of dynamic lighting effects, Yottamaster have always been committed to creating the ultimate personalized external gaming equipment for gamers. Discover the battleship gaming NVMe enclosure for you—equipped with uncompromising speed, deeper gaming imersion and…
Read more about this product
4 Review
Soket 2 B key M.2 NGFF SSD(SATA transfer mode) to 2.5" SATA adapter. The speed and other properties is not changed,only form conversion interface. Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of M.2 NGFF (SATA) SSD. You can connect it to desktop or laptop. Transparent to the operating system and does not require any software drivers. Size: 10cm…
Read more about this product
4 Review
【Package Included】1 x 5.25" to 3.5" Drive Bay Adapter. 【General standard】Drive Bay Adapter fit for any 3.5" HDD into your existing 5.25" Drive Bay. 【Easy to install】SATA hard drive is easy to install,can convert a 5.25 inch bay to a 3.5 inch bay. 【Efficient usage】Bay Mounting Bracket maximize the internal space of your computer case for efficient usage…
Read more about this product
4 Review
【4 Bay Raid Enclosure with 64TB Large Capacity】: 4 Bay External Hard Drive Storage Enclosure, Support RAID 0/1/3/5/10/jbod/Single Exclusive RAID Mode which can meets different work requirements. and Compatible 3.5 inch SATA HDD hard drive, Supports up to 4 x 16TB hard drive, Total capacity up to 64TB. 【Super Speed USB3.0 Transfer Speed up to 5Gbps】…
Read more about this product
4 Review
Compatibility : Only support M.2 NVMe SSD (PCI-E NVMe-based), doesn't support B-Key SSD(SATA-based) and M-Key M.2 SSD(PCI-E AHCI-based), support size of 2230 / 2242 / 2260 / 2280. 22*30mm/22*42mm/22*60mm/22*80mm. Speed:UP to 10Gbps High speed M.2 NVME to USB 3.1 (Gen 2) SSD enclosure, perfect solution for data transfer and data backup, the actual…
Read more about this product
4 Review
Only for NVMe M-Key M.2 SSD (PCIE-based). Applicable to sizes 2242 / 2230 solid state drivers. Does not support M.2 SATA based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. USB3.1 Gen 2 10Gbps are recommended for extreme speed performance. Backward compatible with USB 3.1 Gen1 and…
Read more about this product
4 Review
STRUCTURE: Anti-static bags are made from complex materials, silver laminated, ESD Shielding bag can utmostly protect sensitive components from potential static damage. ESD Shielding Bag's special 4 layers structure forms an induction hood effect to isolate the inside items from electrostatic field. Besides, the inner layer is made of static eliminable…
Read more about this product
4 Review
USB 3.1 Gen 2 Port support the speed of data transmission up to 10Gbps,give you a steady and efficient data transfer.Downwards compatible with USB3.0/USB2.0. ★★Please Note: Only for M.2 B Key,B+M Key"SATA TYPE" SSD,Not Support NVMe M.2 SSD, Not Support PCIe based M.2 SSD.★★. Professional Aluminum Case,Ultra slim design for a modern look.Provides heat…
Read more about this product
4 Review
Compatibility : Only support M.2 NVMe SSD (PCI-E NVMe-based), doesn't support B-Key SSD(SATA-based) and M-Key M.2 SSD(PCI-E AHCI-based), support size of 2230 / 2242 / 2260 / 2280. 22*30mm/22*42mm/22*60mm/22*80mm. Speed:UP to 10Gbps High speed M.2 NVME to USB 3.1 (Gen 2) SSD enclosure, perfect solution for data transfer and data backup, the actual…
Read more about this product
4 Review
Supports four 3.5-inch SATA hard drives to USB 3.0 or eSATA interface, using a single USB 3.0 or eSATA cable. Access 4 hard drives individually (JBOD). Energy Saving design, reducing power consumption by 25%. Built in 80mm Cooling fan with Fan Speed Control, reducing HDD heat up to 33%.
4 Review
PATENTED DESIGN - our patented design elevates your M1 Mac mini and provides easy front access to your most-used peripherals – now, with an SSD enclosure for added convenience. Mac mini and SSD drive not included. BUILT-IN SSD ENCLOSURE - equipped with a built-in SSD enclosure space to easily increase memory storage without adding clutter to your…
Read more about this product
4 Review
Case Only! (devices and accessories are not included) this charger case is designed to fit cell phone, power bank, portable charger, apple wall chargers, power adapters and other small sizes electronic devices. This travel cord organizer is equipped with a mesh pocket to hold USB Cable and Memory Cards, USB C Hub, Type C Hub, USB Multi Ports Type c hub…
Read more about this product