🔧 Tile Leveling System Clips - 400 Pieces of Clips (1/32 inch or 1mm) Review

They are listed as 1/32" (1mm). The problem is that 1/32 inch is 0.8mm and they are actually 1mm so the gap is 25% larger than you would expect if you are looking for 1/32. Another problem is that the sides are quite wide so the slightest amount of washer caught between the tile and the clip will drastically upset the alignment - and this cannot be solved by simply wiggling - the clip will need to be removed and cleaned (and the side of the tile needs cleaning. Also, they're quite wide, expect…

Easily break when you blow if you try to be careful it might work but the tile might be uneven and if you push more it will break! Now all you have to do is remove the tiles and insert new clips. I end up using more clamps than usual, so if one breaks, another pops up. It worked, but now the ones that broke while putting them on are not broken. This means that some of the plastic is only level with the tile and is difficult to remove but painful when applying grout. I used half the clips and…

If you plan to use these clamps alone, yes they are *compatible* with the Raimondi system, but they are NOT identical - don't take them halfway through like I did of work and don't expect any alignment problems. These clips are 20% thicker than the Raimondi 1/16" clips (see photo) and this difference is visually noticeable when you slide the tiles apart due to the different gaps. So if you only want to use these clips with Raimondi wedges and Tightening tool, great. But don't expect to be able…

wedges not straight. When it comes to good tile, everything has to be flat, level and even. These wedges are not straight. I haven't used the wedges yet, just got them today. I immediately noticed that the side that goes against the tile isn't straight. They look like they are made out of flimsy plastic bent from poor construction. I went back to the site where I bought it and looked at the photos that were on the site. The wedges look absolutely straight in all the photos. The ones I received…

Not a pro just a lot of DIY tile projects. Lev-tec is my favorite in this style but $ but they never break when I use tool, I broke maybe 2 out of hundreds and hundreds, bottoms are flimsy. I have tried thousands of this brand. They break very cleanly (better than Levtec), any piece that is left is easy to pick up and pull out. in the case of an uneven position with large-format tiles or floorboards. Just have a few types of pins with you so you can tuck them in if you catch one. They are great