Miady RV Furnace Vent Screen: Bug Cover for Camper Heater Exhaust Vents - 4.5x4.5 Stainless Steel Mesh Screens with Installation Tool Included Review

Product works as described. The spring that came with it is too long in my opinion. After attaching it to my air vent, the spring seems to have little to no tension and the screen moves a lot during movement. If it had a rubber grommet around the base where it meets the vent I think that would help. Overall I am not satisfied with this product.

Works great after some rework. I installed the screen as instructed and the screen did not stay in place. The hook on the camper side doesn't hold the vent well. I ended up taking wire cutters and cut off the big hook and then used needle nose pliers and made a new smaller hook. Then the product worked great. After I changed the hook, the product worked the same as other products I've used before.

The screen fits my 4x4 inch oven vent perfectly, but don't waste time installing it with the included springs. Good idea, but useless. I used some thin aluminum wires stretched under the sleeves of the vent, then passed through the screen and rolled up. I ordered this brand because the screen was listed with a finer mesh than others and it came with 2 springs. The springs were useless (for my application) and I believe the mesh is the same as other brands. No complaints. Worked fine in the end.

These screens are robust and well made. The included springs that hold the screens in place are TERRIBLE! They bend easily, are almost unusable and one was broken in the packaging. Don't even try using feathers unless you really like being frustrated. Another reviewer used wire to hold the screens in place. I followed his advice and am satisfied. To the manufacturers, reset the springs, they DO NOT WORK, maybe just add enough wire to attach the two corners. Without the feathers, this product…

Get ready for an elegant dance between springs, tool and lid holes that will test your patience. I had to start the timer. This is a single vent domestic stove. This screen fits perfectly on the outside of the tablet. The problem is finding the right spot, far enough off center, to attach the springs and give them enough tension. Do not place the springs directly over the center of the firebox. The feathers are too big. Like other comments, some if the mesh cover holes accommodate the tool more