🖨️ 3D Printer Parts & Accessories
2 Review
【Quality Assurance】Creality 100% official, high performance and precision assembled 24v hotend kit, suitable for Creality Ender 3, Creality Ender 3 Pro and Creality Ender 3S 3d printer upgrade units. The hotend extruder kit and accessories are all original and high quality from 100% quality assurance. Capricorn ptfe tube 1.75mm is far superior to the…
Read more about this product
2 Review
Upgrade spare parts kit, compatible with Dotbit/ FYSETC BMqj, Trianglab BMqj, original BMqj, Provide pins of different lengths, which are suitable for all kinds of extruders designed by yourselves or modified. Direct Drive Diy Basic Kit: very well made parts,compare with old version, these accessories are more durable and stable. DIY part: Used this kit…
Read more about this product
2 Review
BLTouch is an auto leveling sensor for 3D Printers based on open-source. Simple, Smart, High-precision. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on. Comes with 2m dupont connector extension cable set. Additional parts may be required for installation on certain printer models. MOUNT NOT INCLUDED.
2 Review
【High accuracy of multi-point detection】When the metal probe is in contact with the printing platform, it can record the height of each point, and then create a virtual plane, calculate the inclination angle between the two, and feedback the information to the computer, which can then be based on these The information adjusts the nozzle angle of the…
Read more about this product
1 Review
✨Upgraded All Metal MK-8 Extruder Feeder Drive: An original upgraded replacement part for Ender 3 / Ender 3 Pro / Ender 5 / Ender 5 Pro / Ender 5 Plus / CR-10 V2 / CR-10S Pro V2 3D printer. It makes loading the filament easier and smoother, no worries about filament scraping or breaking. ✨Upgraded Hand Twist Leveling Nuts: Made of aluminium alloy, rust…
Read more about this product
1 Review
Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room!. Dustproof and good noise reduction. Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability. Table…
Read more about this product
1 Review
3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. 1* PTFE cutter with an extra sharp razor is also included to ensure…
Read more about this product
1 Review
High resolution: 5.5 inch LCD with 2560 x 1400 high resolution ensures your printing with high precision; Extra MIPI connector provided for M05 or older version of 3D printer users. Easy to install: assembly of the 2K LCD screen is simple and easy. Original 2K LCD screen applied on 3D Printer with tempered glassed pre-installed. Quality material: 5.5…
Read more about this product
1 Review
Maximum display /rotate weighing less than 500g(1.1Pound), if use UV light , close to light will help to speed up and rotate heavier. Use Power from UV lighting /nature Solar Power / Fluorescent Lighting and AA Battery. The rotation direction can be reversed by stop the rotary table with hand. Solar panels on 4 sides ensure maximum light reception…
Read more about this product
1 Review
M2 Hardened High Speed Steel with Electroless Nickel plating and WS2 coating. Fits: All printers with V4 / V5 / V6 1.75 Hotend / Prusa i3 MK2 / MK2S / MK3. Orifice size: 0.6mm. Limited lifetime warranty against wear. Made in USA by Micro Swiss.
1 Review
100% Snapmaker CNC MDF platform. Easy to install and remove, long durability. Compatible with Snapmaker 2.0 A350 A250 A150. Professional Accessory for Snapmaker 2.0 3-in-1 3D Printer. Size: A350: 334 × 364 mm; A250: 244 × 264 mm; A150: 174 × 174 mm.
1 Review
Circular arc Tooth Profile Tooth Space is Small, Suitable for Straight Line Driving. 2GT System is an Extension of The HTD System With Greater Load Carrying Capacity. Breaking Strength: 86 N per 1 mm (62 lbs. per 1/8") Belt Width. Working Tension: 111 N for 25.4 mm Belt (25 lbs. for 1"belt). Temperature Range: -34°C to +85°C (-30°F to +185°F).
1 Review
1*All Metal MK-8 Extruder Feeder Drive 1.75mm Filament for Ender 3/3 Pro/5 CR-10/10S/20/20 Pro .It makes loading the filament easier and smoother, no worries about filament scraping or breaking. 1*1 Meter XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less…
Read more about this product
1 Review
【Specification】: Size: 260x200mm; Thickness: 0.15mm; Quantity: 5 Pieces. 【Durable】:Both sides of this FEP film are covered with a protective film. Resistant to high temperatures (204 ° C), Chemically resistant, Ultimate non-stick surface, UV stable. 【High Transmittance】:95% light transmittance fep release film, which ensures high stability of UV…
Read more about this product
1 Review
Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation. UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting…
Read more about this product
1 Review
Frame for FEP/NFEP filmsAnycubic Photon Mono 4KCompatibility:Photon Mono 4KPhoton Mono 2KPhoton MonoPhoton D2Photon UltraMaterial: steelSize: 173x115.4mmSet: Steel frame (2 halves), M3x6 screw - 28pcs. Forget about expensive films in a plastic frame, with our frame you can put any FEP or NFEP film that suits you and your budget. Fits perfectly in the…
Read more about this product
1 Review
Dimension:6*22.5mm, diameter:6mm;length:22.5mm. Material:Titanium alloy. Thread size: M6.
1 Review
Material: The 3D printer heatsink is made of high quality aluminum alloy. Fits: The heat seak suitable for V6 Prusa i3 MK3 J-Head Extruder Hotend Bowden . Universal For Remote Long or Short Distance,Heatsink Inner Bore: 4.2mm. Wide Application: The printer heatsink perfect used for M7 thread V6 Heatbreak. Package Included: Long Heat Sink Aluminum M7…
Read more about this product
1 Review
Nema 17 Pancake Stepper Motor with 26Ncm holding troque. Bipolar stepper motor ,dimension 42*42*30mm, 2 phase, 4 leads. Step angle 1.8deg, 200 step/revolution. Rated Current/phase 1.2A & Phase Resistance 2.5ohms. Low noise high speed 3d printer stepper motor, build with 1m Cable and Connector
1 Review
The Spool holder can rotate 90C in a single track, making the filament better fit on your table. This Spool holder kit is 100% original from creality and made of high strength ABS and PC material. The delicate appearance with surface sanding process makes the printer elegant. We change very big creality packing box for this kit with our suitable box, so…
Read more about this product