🖨️ 3D Printer Parts & Accessories
3 Review
Nozzles parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6. Cleaning needles parameter: 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use for cleaning other small parts, such as throat and feeder gear. Package include…
Read more about this product3 Review
THE MOST RELIABLE, EASY-TO-USE 3D PRINTING EXTRUDER: The MakerBot Smart Extruder+ is the industry’s highest quality, sensor-packed extruder, and ensures the best possible 3D printing experience. SENSORS FOR RELIABILITY, SWAPPABLE FOR SEAMLESS WORKFLOW: Ensure a high percentage of print success with sensors for filament and clog detection that…
Read more about this product3 Review
The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. The resin can cure in 10-15 seconds from a distance of 5 cm from the light, but thicker parts require more time. New designed curing bracket, more sturdy than others. Easy to install with…
Read more about this product3 Review
5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer). Nozzle Throat Tube: Material - Stainless Steel; Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm. 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material…
Read more about this product3 Review
E3D V6 all metal hotend 0.4mm nozzle for 1.75mm filament (with Bowden add-on) (24V). The E3D V6 has been redesigned from the ground up: smaller, easier and higher performance. Use up to 300C with the supplied thermistor for Polycarbonate, Nylon, PLA, ABS and more. Original E3D package. Assembly instruction available on E3D website. Fast free shipping…
Read more about this product3 Review
The upgraded extrusion hot-end kit compatible with ender 3 /3pro/CR10/CR10s printers is made of high-quality materials. Mk8 extrusion hot end kit: with two 0.04mm brass nozzles, wear-resistant and high-temperature resistant, not easy to wear. 1 heat insulation silicone pad, aluminum alloy heat sink, hardware kit. High-quality MK8 0.4mm Nozzle: the brass…
Read more about this product3 Review
Creality 100% Original LCD Screen: The screen thickness is 0.55mm.Compatible for Creality LD002R / ELEGOO Mars /Anycubic photon 3D Printer. (Note: Not compatible for Elegoo Mars Pro.). High Resolution: 2K HD LCD screen 2560 x 1440 resolution. High precision manifests the beauty of details. 0.01-0.05mm Print Precision: Producing a smooth surface and…
Read more about this product3 Review
Nozzle: 0.4mm. Material: brass. Input Diameter: 1.75mm. Output Diameter: 0.4mm. 10Pcs Extruder Brass 0.4mm Nozzle For 3D Printer.
3 Review
【Material】 Metal and Plastic, stable, durable. 【Easy Assembled】Easy installation and quick installation. 【Rotatable 3D Printer Filament Holder】3D Printer Filament Holder is Rotatable, do not entangle the filament. It is very convenient to use. 【Compatibility】Suit for Ender-3 series, CR-10 series, Artillery Sidewinder X1, fits in most 3d printers…
Read more about this product3 Review
Widely Application: This BL Touch kits works for Creality Ender 3 / Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ CR-10 3D Printer with 32 bit V4.2.2 or V4.2.7 mainboard. It requires 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard. Easy Firmware Installation: Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official…
Read more about this product3 Review
It is 100% Creality Original. This set of 3D printer cable kits is used to extend Creality CR-10/10s Series 3D Printer for longer working distance. Compatibility - CR-10/CR-10S, CR-10 S4, CR-10 S5, CR-10 mini Series. Length - 1M/3.28ft; Weight - total 400g/8.82lbs. Net Weight: about 400g.
3 Review
Package Include: Vaccum kit includes Vacuum Bag*10, Hand Pump*1, Sealing Clip*2, Desiccant*15, Humidity Indicator*15(Note:The humidity card is upgraded in current time, part of it has been replaced with the new color-changing desiccant version. Two version are shipped freedomly), User Manual *1.which can satisfy storaging 10 used filaments at the same…
Read more about this product3 Review
It is suitable for Ender 3 / Ender 3 Pro / Ender 5 / Ender 5 Pro 3D Printer. The laser engraving head kits enables to engrave metal, wood, acrylic, and others substances. It can also cut wood and acrylic, depending on the wattage. Easy to Use: The laser engraving head kits run from the fan port on the machine and are usually quick to assemble. One-line…
Read more about this product3 Review
IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality. LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results. HIGH SPEC: Withstanding temperatures up to 260C, this Bowden…
Read more about this product3 Review
[Super Durable Tungsten Material] This nozzle is made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing. [High Temperature Resistance ] The max temp could reach at 450c, suitable for 3D printing at…
Read more about this product3 Review
Designed to finish, repair and modify 3D printed parts. Works with plastic 3D printing materials. USB Cord Length: 1.2m (120cm). Power: 8W for each tip. Content: Heating Tool / 7 Interchangeable Tips / Tool Stand / Cleaning Brush. This is an electronic product. Please don’t crush, compress or drop the product. The product might be damaged during…
Read more about this product2 Review
Material: made of high quality brass, sturdy and durable. Installation: external M7 thread connection. Size: input diameter is 1.75mm, output diameter is 0.4mm. Compatibility: flashforge and others using the MK10 nozzle. Quantity: 20 pcs 0.4mm MK10 extruder nozzles.
2 Review
【Full set of 3D printer tool kits】Contains various tools during the 3D printing process, which can be used for cleaning the nozzle and platform before printing, and can also be used for post-printing processing. 【High cost performance kit】Package includes: 1 pcs Carving Knife set (13 blades & handle), 1 pcs shovel (sharp edge with wood handle), 1 pcs…
Read more about this product2 Review
Package includes: you will receive 8 pieces 3D printer leveling parts in the package, which are intended to replace the springs under the heated bed; Enough quantity could meet your different needs and daily replacements. Quality material: the 3D printer heat bed leveling parts are made of quality silicone, which help cutting back any vibrations when…
Read more about this product2 Review
3D Printer Nozzles Set - A set of 3d printer nozzle, total in 28pcs. Nozzle Diameter - We offer nozzles in many different diameters: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm and the input diameter 1.75mm. out thread: M6. 3D Printer Brass Nozzle - Made of high quality brass material, it can be used to print PLA, ABS, PETG, Nylon, TPE, TPU, PC and…
Read more about this product