🖨️ 3D Printer Parts & Accessories
3 Review
It's 100% Creality Original. Suitable for Creality Ender 5 3d printer. Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F). MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 24V 40W.
3 Review
✔️Removable design, easy to install:)). ✔️Voltage: 24V, Power: 40W. ✔️Head diameter: 6mm, Head length: 20mm, Total length:1 Meter. ✔️Heating head material: 304 stainless steel. ✔️Made by WINSINN. Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc.
3 Review
Nozzle Size: 8*13 (mm). Durable material: Copper (brass).Good abrasion resistance, heat resistance, and corrosion resistance. Input Diameter: 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm. Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm. Package: 4 pieces of black nozzles, one for each size. It is convenient for you to replace it…
Read more about this product
3 Review
100% brand new and high quality. Tip of the nozzle, aluminum heating block, Throat pipe. MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V40W. Material: Aluminum & Stainless Steel & Brass. Creality 3D Printer Full Assemble MK8 exturder set For CR-10,CR-10S.
3 Review
Material: PTFE (Poly Tetra Fluoro Ethylene). PTFE Tube as used for feeding 1.75mm filament in many 3D Printers. Temperature Range: -190 - 260C. Notice:These 3D printer accessories are small parts. Please keep them away from children to avoid swallow risk. If you have any problem or question,please feel free to contact us.
3 Review
It is Creality Original LCD screen display for CR-10, CR-10S300, S400, S500, NOT for ENDER3. 2019 new version of Replacement LCD display for Creality 3D Printer. CR10 lcd is easy to operate, can work with E/Z/Y/X axis motors. CR10s display comes sealed in anti-static bag, ready to plug and go!. CHPOWER is a TRUSTED VENDOR. Buy with confidence.
3 Review
A necessary Artilery Parts. Replacement product: spare parts compatible with the Artillery Sidewinder extruder and all versions of the Genius hotend. Thermistor Sensor: built-in NTC100K thermistor. Head size: φ3X5mm; terminal XH2.54, 2PIN male head with terminal; cable length: about 70mm/ 2.7 Inch. If you need Sidewinder replacement arm or heater caridge…
Read more about this product
3 Review
The TL-Smoother is an addon module for 3D printer stepper motor drivers. Lower vibration lower noise smoother result. The board provides flyback diodes (freewheeling diodes) for the motor outputs. Also protected against induction voltages in the unpowered state of the driver. You will got smoother movement especially on the delta-style 3Dprinter under…
Read more about this product
3 Review
This package contains 4 sheets of 230mmx180mmx0.15mm FEP Teflon film and two complimentary replacement plastic spatulas. Replacing these sheets regularly is recommended to reduce print failures and for best print quality. Please be aware that the 3 spatulas you receive will either be black or yellow. FEP Teflon film is highly UV resistant and able to…
Read more about this product
3 Review
★【What You Get:】 In this 3d printer tool set, it include 2 flat wrench, 1 socket wrench, 3pcs 6mm, 7mm, 9mm socket, 5pcs 0.35mm cleaning needles, 5pcs 0.4mm cleaning needles, 5pcs spatula palette knife, 1 tweezer total 23pcs are well packed in a case. ★【Pratical Wrench:】 Set include 2 flat wrench which open mouth width is 17mm and 21mm, a mini socket…
Read more about this product
3 Review
This is a great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with most 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation. This Creality 3D hotend sock will greatly help to stabalize the temperature of the hotend regardless of the…
Read more about this product
3 Review
Reliable material: made of polycarbonate, its nice wear resistance, flame retardancy and oxidation resistance can assist your 3D printer to complete its work well. Broad compatibility: it's applicable for most DIY 3D printer's V slot aluminum profile, including, but not limited for Creality, Ender 3, Anet, etc. Nice expressiveness: these 3D printer…
Read more about this product
3 Review
USED FOR-- Aluminum mounting plate can play a good fixed role and make parts not easy to loose, more convenient operation. It is suitable for NEMA 17 42 series stepper motor approx. 42 x 42mm / 1.7 x 1.7in. EASY INSTALLATION-- Stepper motor mounting plate features simple construction, easy to install, saving time and labor. STANDARD SIZE-- The Mount…
Read more about this product
3 Review
3D printer parts aluminum heater block extruder hotend kit is replacement parts for Ender 3 /Ender 3 Pro / Ender 5 /Ender 5 Pro /CR10 /CR10S /S4 /S5. 3D Printer Ender Silicone Covers are great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with most 3D printers. This silicone sock is much more durable and…
Read more about this product
3 Review
Brand: Capricorn. Length: 1 Meter. ID: 1.95mm ± 0.05mm. OD: 4.0mm.
3 Review
Super Convenient: This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily. Excellent Performance: This magnetic bed has strong flexibility and heat resistance up to 70 °C without…
Read more about this product
3 Review
【 34 Piece Great Tool】The 3D printer accessories set contains 34 pieces high-quality tool, including 10pcs-Cleaning Needles, 2-pcs Tweezers, 1pcs-Pliers, 1pcs-Scarper, 10pcs-Clean up Knives Kit,10pcs-Carving Knife totally 34 pcs. High-quality Tool Kit, Reasonable Price. 【One Convenient Tool Kit】This 3D Printer Tool Kit contains all kind of essential…
Read more about this product
3 Review
Teflon Tube - outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260°C. PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm. PC4-M10 fittings - thread M10/6mm, inner…
Read more about this product
3 Review
100% Creality Original. X axis 765x6mm Y axis 720x6mm Belt for Ender 3. Material: Rubber. Rubber Opening Belt with Copper Buckle. If you have any question or problem,please feel free to contact us.
3 Review
What you receive: package comes with 8 pieces 200 x 140 x 0.1 mm FEP films, and 2 pieces replacement plastic spatulas, enough quantity to meet your replaceable needs, replacing these sheets regularly is recommended to reduce print failures and for nice print quality. Quality material: FEP film sheet is heat resistant to high temperature (204 °C), with…
Read more about this product