💽 Hard Drive Accessories
2 Review
Conect to the IDE device using USB interface and SATA device too. Transfer rate upto 480MBps (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver. Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.). External power adapter included, for power up the 5V/12V IDE/ATAPI devices Usage. For easy connect…
Read more about this product
2 Review
USB 3.1 USB-C to NVME M-key M.2 NGFF SSD External PCBA Conveter Adapter Vertical Type. Vertical Type M-key Connector, and You can connect the NVME SSD and no need to open the case. The item included one Adapter and cable. USB 3.1 to M.2(NGFF) NVME Storage adapter, providing one USB 3.1 type-C connector on the host connection and one 67pin B key M.2…
Read more about this product
2 Review
【Special Design】This Silicone Case is specially design for Samsung T7 Touch Portable SSD 500GB 1TB 2TB External Solid State Drives and fits it well. 【Better grip (non-slip)】Silicone material on the protective cover improves grip when holding an external drive in your hand or on a desk or table. 【Seamless fit】Silicone skins are specially designed to fit…
Read more about this product
2 Review
【Special Design】This Silicone Case is specially design for Samsung T7 Touch Portable SSD 500GB 1TB 2TB External Solid State Drives and fits it well. 【Better grip (non-slip)】Silicone material on the protective cover improves grip when holding an external drive in your hand or on a desk or table. 【Seamless fit】Silicone skins are specially designed to fit…
Read more about this product
2 Review
【COMPATIBLE】2.5 inches hard drives; WD 4TB 3TB 2TB 1TB My Passport Portable External Hard Drive USB 3.0. 【PERFECTLY FIT】 This case is made of friendly good quality silicone; Easy to put on and Fits 2.5 inches hard drive snugly;. 【EXTRA PROTECTION】It is special designed and well made to give added protection against droppage and scratch and dirtiness…
Read more about this product
2 Review
Foam Dimensions (HxWxL): (HxWxL): 12” x 5” x 1.6”. Durable, light, secure, Anti-Static/Shock Protective Foam - 24 USB slots, 2 Hard Drive Slots. Organize and store USB thumb drives, HDD/SATA/SD/mini/microSD memory cards, small computer | audio and electronics peripherals, adapters, small parts, etc. Great for massive stacking storage solutions, the foam…
Read more about this product
2 Review
Designed for both M.2 NVMe or M.2 SATA Module. Quick M.2 Module Lock/Unlock and Easy size change for 80/60/42mm using Rubber Mount. Can accommodate any heatsink mounted M.2 with width up to 26 mm wide. ON/OFF switch for an easy Hot-Swap without unplugging the cable. USB 3.2 Gen 2x1 10Gbps (Theoretical Speed) using Native Type C Technology
2 Review
- New and HQ for IBM Thinkpad Z60 Z60T Z60M Z61 Z61T Z61M W500 W510 W520 W530. The thickness of the HDD Bracket is 9 mm,So please confirm your Hard disk is fit it. - Package included: 1x HDD caddy Bracket,1 Pair 9 mm Rails
2 Review
PCB 240 copper hole for better heat dissipation - The heat generated by the disk can be accelerated through the copper hole. Thickened PCB - The gold-plated version is more durable and stable than the painted version, especially for high-speed signal transmission with better continuity and stability. Large-capacity tantalum capacitor + constant-voltage…
Read more about this product
2 Review
Easy to install SSD, HDD into the bracket, no screws required. Universal drive adapter bracket, suitable for laptop, computer. Support equipment: 2.5inch hard disk, including solid-state disk (SSD) and hard disk drives (HDD). Lightweight and durable, convenient to use, easy to install. Package includes: 1 x Adapter Bracket Hard Drive Holder
2 Review
2010 and 2011 version MacBook Air SSD is 6+12 pin, only one side has contact, size is 109 mm*24 mm. It's on SATA interface. 2012 version MacBook Air SSD is 7+17 pin, size is 109 mm*24 mm.2012 version MacBook Pro SSD is 7+17 pin, size is 89 mm*33 mm. It's on SATA interface. 2013 and 2014 and 2015 version MacBook Air SSD has contact on both sides, one…
Read more about this product
2 Review
---Support SSD type---Only support the M.2 SATA NGFF SSD 22×42mm/60mm/80mm SATA SSD(based M.2 NGFF(B Key/B+M Key) SSD ,Dose NOT support the M.2 PCIe NVMe SSD. ---SSD Case Inteface--- NGFF(inside, NOT support NVME),USB-C 3.1(outside). Transfer Speed up to 6Gbps. ,USB 3.1 Gen 1 5Gbps high speed transmission,Type c Adapter meets all of your type c computer…
Read more about this product
2 Review
README FIRST: The same PowerEdge server type can have two different sizes of the drive bay. Your server HAS TO HAVE 3.5 inches Hot-Plug Drive Bay. This 3.5 inch Drive caddy supports ONLY 3.5-inch hard drives. Check that your PowerEdge Server or Drive Array is LISTED and supported. SUPPORTED 3.5 inch MODELS: PowerEdge 14th Generation R240, R340, R440…
Read more about this product
2 Review
【SuperSpeed USB3.0 with UASP】The 2.5" HDD enclosure supports SATA I / II / III SSD HDD and support UASP Transfer Protocol, maximum data transfer rate of 5Gbps. 20% faster than traditional USB 3.0. 【Wide Compatibility】This hard drive enclosure is suitable for 2.5inch 7mm/9.5mm SATA SSD and HDD, and is compatible with Windows, LINUX and Mac OS and above…
Read more about this product
2 Review
【10Gbps transfer】 This is an M.2 SSD case that converts NVME M.2 SSD to Type C Gen2. The maximum transfer speed is up to 10 Gbps (theoretical value), and the UASP function is also supported. Note: When using the high-speed data transmission performance of UASP, please check in advance whether the PC has the UASP function. 【Compatibility】 Supports 22x30…
Read more about this product
2 Review
ADD EXTERNAL STORAGE TO YOUR USB-C LAPTOP: Turn your M.2 NGFF SATA drive into high performance external storage with this M.2 SSD enclosure. Connect it to your MacBook, Dell XPS or other USB Type-C device. Compatible with Thunderbolt 3 USB-C ports. CONNECT TO YOUR M.2 SATA SSD OVER USB 3.1: Transfer files quickly, without bottlenecks. This M.2 SATA to…
Read more about this product
2 Review
Support 2.5" Hard Drives (SSD and HDD) and fits all popular PC casings If you want to mount 2.5" drives into your PC and get a free 3.5" slot, then this conversion bracket is the optimal solution meeting you requirements. Easy to install and disassemble this dual bracket HDD frame is moulded using high-quality alloys, is a precise fit and thus…
Read more about this product
2 Review
With five independent switches, each hard disk drive switch can be controlled separately. control the power supply of each drivesfree control HDD. With 150W Built in power. Plug and Play, no additional driver or utility needed. (Not Including HDD). With 2 Ports USB 3.0 HUB. Single disk support 16TB. SATA to USB3.1