π° Hydraulics, Pneumatics & Plumbing
3 Review
1.Cap for closing the end of a pipe or fitting,Socket end for connecting to unthreaded pipes or fittings. 2.They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cementγCan be used as a handmade DIY sheif. 3.PVC for corrosion resistance, high strength, and less weight than fittings made fromβ¦
Read more about this product
3 Review
Sufficient quantity: 300 pieces vinyl cap protective covers in classic red and black(9 Size), combined with rubber-like, soft and elastic premium vinyl material, which can also play a nice protective role, slide these flexible caps on and they conform for a snug fit. Size information: these vinyl cap protector have 9 different sizes for you to chooseβ¦
Read more about this product
3 Review
Material: brass, Size: 25.4mm / 1 inch length, female foster quick disconnect plug, female thread on the other end, Pressure Rated: 5000 psi, Temperature Resistance: 1000 Β°C. Accuracy: NC machining, accurately, suitable for 8mm male converter and 1/8" bspp male thread, reliable and no leakage. Easy to Operation: Simply connect each fill adapter to theβ¦
Read more about this product
3 Review
O-Ring Cord made of silicone for use with a variety of chemicals and fluids. Durometer (hardness) of 70A. For use across a wide temperature range from -76 degrees F (-60 degrees C) to 437 degrees F (225 degrees C). Made in the U.S.A. Available in various cross sections and lengths.
3 Review
Balance pressure between piston and Valve, as well as smaller ball and shorter level can bear high pressure. adjustable arm with over 180 degrees of adjustment range. Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" PE Float. Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattleβ¦
Read more about this product
3 Review
If frames are too cold (below 50oF) or too hot (above 100oF) adhesion may be impaired. Installation should take place after construction is completed, flooring is installed and final cleaning is completed. Do NOT stretch material. Product can retract or shrink if stretched. Use very firm, perpendicular pressure when applying. Use wallpaper seam rollerβ¦
Read more about this product
3 Review
5 Year Guarantee and 1 Year Return Policy. Carbon Steel construction. Zinc Nickel coating. ISO 16028. Titanium Nitride "gold color" coating on Male Connector (HF0046) reduces potential leakage that can cause from frequent coupling/decoupling abrasion. Flat face design prevents oil spillage and debris ingress into your hydraulic system. Rated Pressureβ¦
Read more about this product
3 Review
Package Quantity: 10 pack. No tools required,Push fit fittings. Push fit fittings,Quick Connect Fitting 1/4" RO Water System. Standard fitting for water filter systems using 6mm water filter tubing. Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc.
3 Review
Material: High quality brass material with Nickel plating against corrosion. Working Pressure: 200 psi Maximum working pressure. Sealing: Double O-ring ensure 100% sealing in high working pressure. Installation: Easy installation and the tubing also can be removed if needed. Application: Used with ID 3/4 Inch tubing system.
3 Review
Design type: spring loaded; multi-lip. Temperature range: -40Β°F to 225Β°F / -40Β°C to 107Β°C. Good low temperature capability. Low swell in hydrocarbon fluids. Delivers quality and reliable performance for every type of repair.
3 Review
304 Stainless steel make, tight sealing, explosion-proof, high temperature resistant, bending, anti-corrosion, long service life. ABS protective cover to protect clean and thread teeth. Complies with lead free law. Any bending will not crack, good flexibility, good plasticity, long service life. Good tightness, non-toxic, and tasteless.Flexible and kinkβ¦
Read more about this product
3 Review
[Size] - 25mm Outside Diameter, 21mm Inner Diameter, 2mm Cross-Section Diameter. [Hardness] - 70A Durometer (Shore Hardness) for resistance to penetration. [Buna-N] - Standard Nitrile Butadiene Rubber with a wide temperature range from -4Β°F (-20Β°C) to 212Β°F (100Β°C). [Application] - Widely used for pressure washer, filter, pump, water hose, plumbing pipeβ¦
Read more about this product
3 Review
Study and Heavy duty: Certified by SGS Test (USA) and Higher Standard LGA Test (GER). Universal size: 6.5" stroke(11.5" to 18") cylinder piston tube suitable for most executive chairs. Longer service life and 5 years guarantee: Unlike cheap leaky and sinking gas lift cylinder. Length:Fully compressed is: 11.5 ", and the height fully extended is: 18"β¦
Read more about this product
3 Review
Model NO. : CB-100. CT: 64mm; CP: 32.3mm; S: 112mm; T: 84mm. CC: 32mm; CJ: 21mm; CD: 8mm; CE: 20mm. Weight : 968g. Package Content : 1 PCS.
3 Review
No tools required, easy to install, quick connect fitting. Mini quick connect push 1/4-Inch tube OD. Standard fitting for water filter systems and RO Water System using 1/4" water filter tubing. Provides a permanent/removable leak-proof connection. Suitable for water and food applications.
3 Review
90-degree air brake tube elbow fitting for connecting air brake tubes to female NPT receptacles at a 90-degree angle. 3/8" male NPT threads on one end and DOT push-in tube receptacle on the other for use with 3/8" OD tubes. CA360 brass for strength and resistance to corrosion. Operating temperature range of -40 to +200 degrees F (-40 to +93 degrees C)β¦
Read more about this product
3 Review
Genuine OEM replacement part. Garland and US Range commercial kitchen equipment features products, parts and service - ovens, grills, griddles. Use genuine OEM parts for safety reliability and performance.
3 Review
Triplex modular adapter. Variant of model AT173. Provides 6-contacts in the plug portion of the adapter, allowing connection of three single line phones to a single modular outlet. Labeled L1, L2 and L3. Comes with Allen Tel Products' standard 1 year warranty.
3 Review
How To Shut Off Completely: Use the brass material for ball,which will last for a long time and wonβt rust/leak. Unlike other products that use iron, this productβs inside sealer material is Teflon, which is much better than normal plastic. Clean Thread: Itβs very important for installing, we have one specific quality inspection procedure for this partβ¦
Read more about this product
3 Review
Will fit any 1-1/4-inch or 1-1/2-inch NPT male or female thread. Made from durable ABS plastic. High quality Nitril-Bruna N seal. Universal design works with multiple applications. Kit includes check valve and two adapters. Water pressure limit: Max 11 psi.