๐ฐ Hydraulics, Pneumatics & Plumbing
3 Review
Half union for connecting and disconnecting two tubes more easily than with a coupling. 45-degree flare head tube connection on one side and a male NPT connection on the other. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to +250 degrees F. Resists mechanical pulloutโฆ
Read more about this product
3 Review
DIY AIR SYSTEM - Hromee compressed air outlet kit allow you to design and install your own pressurized air system. No more dragging the compressor and reconnecting air hose. It helps you keep the working room clean and ordered. PU AIR TUBING - Length: 32.8 Feet (10M); Outer Diameter: 1/4โ (6.35mm); Inner Diameter: 4.15mm. Max Working Pressure: 120 PSIโฆ
Read more about this product
3 Review
1-1/2 slip x slip unions. Flapper bends over a radius to eliminate sharp 90-degree edges. Capable of vertical or horizontal installation. Slip x slip for 4.3 PSI (10 feet of head) at 130ยฐF. Designed to reduce water hammer.
3 Review
Thermoplastic constant flow fog nozzle. Red polycarbonate body with rubber bumper, black plastic and steel stem. Shutoff - straight stream - fog. Provides consistent volume at any spray angle. For use up to 100 psi (water only).
3 Review
ใProduct NameใStraight Push-in Connect Fittings. ใMaterialใCopper and Plastic. ใSizeใ1/4" Tube OD x 1/4" NPT Thread. ใMaximum Pressureใ145PsiใWorking Temperatureใ32~140ยฐF. ใApplicable TubeใPU / PA / PE / PVC.
3 Review
Freshwater backflow preventer. Durable brass construction. 100% lead-free. Check Valve Size: 1/2". Style: MPT x MPT.
3 Review
Push fit fittings,Quick Connect Fitting 1/4" RO Water System. Standard fitting for water filter systems using 6mm water filter tubing. No tools required,Push fit fittings. Easy to use,Mini quick connect push tee 1/4-Inch OD. Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc.
3 Review
Function: locking nut is reversed threaded; The Bulkhead Fitting with 4 mm thick silicon seal gasket that will contour to the shape of the round barrels. Size: 47 mm x 58 mm, 3/4 inch, Material: PVC, Color: gray; Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums. Durable: will not fade, crack, or peel; Durable andโฆ
Read more about this product
3 Review
The Builders Edge Surface Block for installing fixtures after the siding has been applied to the home, for use on 4 inch-10 inch siding. Mounting blocks are durable, maintenance-free, UV stabilized and constructed with color molded-through so they won't scratch, flake, or fade. Our patented Snap-On Trim Ring makes installation easy. Package Dimensions: 2โฆ
Read more about this product
3 Review
What you will get: package comes with 4 pieces threaded bulkheads for rain barrels, water tanks, or aquariums, spigot and so on, bringing convenience to your daily life. Size information: the double threaded bulkhead fittings are 3/4 inch male and 1/2 inch female thread, which are applicable models fitting for most items; Please check the size beforeโฆ
Read more about this product
3 Review
Adapter for connecting a hose to a male threaded connection of a different diameter. Hose barb on one end and male NPT threads on the other. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. These fittingsโฆ
Read more about this product
3 Review
[APPLICATION]: Grease fittings, sometimes known as Zerks or grease nipples, are small hydraulic check valves used on bearings and similar mechanical assemblies to supply lubricant to internal working parts. [HYDRAULIC GREASING]: These grease zerks feed lubricant into a bearing instead of having to disassemble parts to apply the lubricant, which makesโฆ
Read more about this product
3 Review
ใHIGH QUALITY MATERIALใ Made of 100% stainless steel, these clamps are corrosion resistant and anti-rust. ใSPECIAL DESIGNใ Special cochlear design provides a strong thermal expansion compensation function, which compensates for the dimensional change caused by the change of the hose, so that the pipe is always in a good sealing and fastening stateโฆ
Read more about this product
3 Review
Includes an assortment of the most commonly used 1/4-inch drip fittings. For use with 1/4-inch distribution or soaker tubing. Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows. Durable construction provides years of reliable use. For outdoor use with cold water only.
3 Review
Can be used as a tank check valve for small compressors or as a component in pneumatic circuits. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Fluorocarbon O-rings for higher temperature and chemical resistance. Female and male NPT threads for connecting pipes with different ends. Maximum pressure ratingโฆ
Read more about this product
3 Review
1/2" Pex Quarter Turn Full Port Brass Stop Repair Water Shut Off Ball Valve Lead Free Barb Crimp Ring Type ASTM standard F1807. Pack 10 pcs 1/2" Pex Lead Free Brass Water Cut off Ball Valve. Size: 1/2"Pex Max Pressure (PSIG):150 Max. temperature: 200ยฐF. Fitting System Compatibility:Crimp/Clamp,1/2" Pex Fittings on Both End. Heavy duty: forged Brassโฆ
Read more about this product
3 Review
128 FITTINGS: This 128-piece JIC and ORFS hydraulic cap and plug kit by CO-Z gives you plenty of fittings in the 6 most commonly needed ORFS and dash sizes: 4, 6, 8, 10, 12, and 16. SUPER QUALITY: Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environmentsโฆ
Read more about this product
3 Review
Package Dimensions: 2.2 cms (L) x 14.8 cms (W) x 2.2 cms (H). Product Type: Hose Pipe Fitting. Package Quantity: 1. Country Of Origin: United States.
3 Review
Product OverviewThe Paddsun Wireless Control Hydraulic Recovery is a cutting-edge winch remote control unit designed for heavy-duty operations in the field of hydraulic equipment. This innovative device allows operators to monitor winching or lifting activities from various positions, providing enhanced flexibility and efficiency. With compatibilityโฆ
Read more about this product
3 Review
HIGH QUALITY - Made of high quality 65Mn Spring Steel. QUANTITY - 80PCS. SIZE - 8 Sizes, 7mm 9mm 10mm 11mm 14mm 16mm 17mm 18mm, each size 10pcs. PACKAGE - Packed in a sturdy convenient case, can be used for a storage box. APPLICATION - Use them on push mower, riding mower and snowmobiles, ideal for vacuum and low-pressure fuel lines etc.