🪚 Industrial Drill Bits
2 Review
High Speed Steel 5mm Brad Point Jobber Length Drill Bit. Ideal for use with True Position Tools products (TP-1934 & TP-1935). For melamine, veneer, and other woods. HSS far outlasts the cheaper Carbon Steel or Stainless Steel. Clean holes in melamine, veneer and hardwoods.
2 Review
【M35 Cobalt Steel】These twist drill bit set made of high-quality M35 cobalt-containing high-speed steel, resistant to high temperature and grindingIt,which allows the drill to easily drill on hard surfaces then quickly achieve the purpose. Offer excellent performance and durabi. 【Smooth design】: With 135 degree self-centering tip, apply pressure evenly…
Read more about this product
2 Review
Funnel Auger, 3" (80 mm) Long. Used as second tool in line. Breaks up remains of stoppage left by straight auger. 3" in Length. This Long Tool Fits C-4 C-6 C-7 C-8 C-9 C-31 C-32 C-33. C-31 IW C-32 IW C-33 IW C-44 IW C-45 IW.
2 Review
Package and Size: 5 piece. Diameter Size 3/16 inch, Total Length 6 inch. Heavy Duty: SDS Plus Drill Bit for Rotary Hammers has Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into Masonry, Concrete, Brick & Cinder Block. Easily & Smoothly Drill:3-4X More into Reinforced Concrete, Brick and Masonry by…
Read more about this product
2 Review
SPEED-TIP self-feed design effortlessly pulls the bit with minimal effort and faster holes. Optimized curved paddle design quickly removes chip build-up for more holes per charge. Impact Strong increases shank stability and durability. Angled spur cutting edge scores wood for clean holes and reduced blowout. Maximum performance in cordless and corded…
Read more about this product
2 Review
STEP DRILL BIT STORAGE CASE ONLY - This storage case replacement for five standard step drill bits that can replace 50 individual drill bits, 1/4" to 1-3/8" 10 steps; 3/16" to 7/8" 12 steps; 1/4" to 3/4'' 9 steps; 1/8" to 1/2" 13 steps; 3/16" to 1/2" 6 steps. The top slot can store an automatic center punch. [Outdoor dimension:6.5*2.25*5 inches]. ALL…
Read more about this product
2 Review
Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits. Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability. More holes per charge in cordless impact and drill drivers. Maximum performance in hammer or rotary drilling…
Read more about this product
2 Review
Fearure: Straight Shank; Color: Champagne Color. Total Length: 65mm / 2.6"; Shank Diameter: 3.3mm. Product Name: Twist Drill Bit; Package Content: 15pcs x Twist Drill Bit. Material: HSS, Cobalt; Flute Length: 30mm / 1.2". Bit Diameter: 3.3mm; Weight: 50g.
2 Review
Set of 20 jobber length drill bits includes one each of wire gauge sizes #80 through #61. High-speed steel (HSS) provides hardness for wear resistance. Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals. 118-degree conventional point for a range of drilling applications. Jobber length drill…
Read more about this product
2 Review
【Dimension】- The shank diameter of this center drill is 1/4-inch, the working edge length is 3mm / 0.12-inch, and the total length is 47mm / 1.85-inch. 【Material and Features】- High Speed Steel, high hardness, rustproof, solid, durable and excellent for use. 【Durable and Resistance】- Center drill bit is made of HSS high speed steel, with extremely sharp…
Read more about this product
2 Review
Jobber length bits designed for drilling stainless and hard steel, plastic and wood, Premium Swift Bore (Registered Trademark). Hardened and tempered M2 high-speed steel bits fall between standard fractional drill sizes. Precision ground, bright finish with polished flutes that increase chip ejection. 135-degree split point for fast penetration and…
Read more about this product
2 Review
Super-hard titanium coating lasts up to six times longer than high-speed steel. Self-starting point starts on contact. Balanced double flute eliminates chatter and vibration. Titanium reduces heat for longer life. Drills clean, accurate holes in these thin materials (up to 1/8 In.): sheet metal, ducts, steel, copper, brass, aluminum, plastic, Plexiglass…
Read more about this product
2 Review
2 in 1 design drills both the through hole and the counterbore for hex bolt and washer installation. Full screw point tip and auger flute design allow for easy through-hole drilling. 5/8": 1-13/16" counterbore to set washer. Ideal for deck building and more. 8" bit length for deep drilling.
2 Review
For use with SDS-max hammers. Star-point twist tip is self-sharpening and less binding. Reflective element reflects the energy of the return shock then converts it into new impact energy to increase material removal. Offers 100 hours of working time without interruption.
2 Review
Product Type :Tools. Package Dimensions :18.288 Cm L X10.922 Cm W X5.842 Cm H. Country Of Origin :China. Package Weight :0.410009Lbs.
2 Review
Tapered drill with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws. Adjustable four-cutter counter bore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. 1/4" quick-change…
Read more about this product
2 Review
Set of 26 jobber length drill bits includes one each of letter sizes A through Z. Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials. Gold oxide finish lubricates and provides wear resistance on ferrous materials. Self-centering 135-degree split point penetrates hard material without a pilot…
Read more about this product
2 Review
The product is easy to use. The product is durable. The product is manufactured in United States. SDS-Max Shank. 10 inch overall length.
2 Review
All the Size You Need - Assortment of 29 jobber length drill bits (1/16" to 1/2" in 1/64" increments). Shanks fit standard three-jaw drills and use in drilling wood, plastic, and Light-gauge metal. Industrial Grade HSS - HSS drill bit set with black and gold coating provide hardness for wear resistance, durable, hard, super premium drill bits that are…
Read more about this product
2 Review
Planting auger for digger hole: when the auger drill is working with the electric drill, it is self pushing and can keep steady due to its cylindrical spiral design; Easy to use with electric or cordless drill; Save your time and energy, dig hundreds of holes in minutes is not a dream. Size: the size of auger drill bit is 1.9 x 14.5 Inch/ 4.6 x 37 cm…
Read more about this product