Revain logoHome Page
리뷰
amarcor instax accessories fujifilm filters 로고

Amarcor Instax Accessories Fujifilm Filters

no le sirve muy bien y el bultito casi no cierra parece que lo hicieron para otra venca y la el en como esta present que arriba ☝🏻 att. La Esposa de Lucas전체 리뷰보기

benfei adapter supports compatible amazon 로고

BENFEI Adapter Supports Compatible Amazon

So far I have tried this device with HDMI output from NVidia Shield Android tablet and 2nd gen Chromecast. In both cases it worked very well with both the AV inputs of a modern 4K TV and an old NTSC TV. At first I had a few questions. Android Table did not recognize the HDMI output, until I restarted the tablet. When I connected my Chromecast for the first time, the TV showed only static, but the second time it worked. I don't know what the problem was, but now everything works fine. The case is made of durable plastic and all ports are physically solid.전체 리뷰보기

davis echomastrer standard radar reflector 로고

Davis Echomastrer Standard Radar Reflector

Item incomplete

Good product but when I received it one part was missing and because the packaging was opened the other parts in the box were lost. Very poor quality control!전체 리뷰보기

windshield suction mount tuning accessport 로고

Windshield Suction Mount Tuning AccessPORT

This product is priced right. Otherwise the manufacturer has to change it. Pros: - The fit and finish of the V3 AccessPort stand is perfect - Overall this item looks like a quality product and is made from a strong, presumably impact resistant plastic (probably ABS, most likely Polypropylene) - The suction cup stays in place. In my use of this mount, the shell has only come off the windshield once or twice - the vertical tilt adjustment lever stays in place once you adjust it as desired. Bad: - Suction cup mount could use a little more suction and would be much better - Ball joint which allows you to Positioning the AccessPort the way you want it does a pathetic job. Either the ball is too small or the nest is too big. No matter how hard you tighten the connection, the AccessPort will still tend to tilt or even wobble, depending on how much force is being applied to the connection. OBDII cable. A hard turn can sometimes cause it to move. This is of course not ideal in a racing scenario. I have stopped using this item and simply attached the original bracket that came with my V3 AP directly to the windshield (note that this was Cobb's intention and this bracket was not designed to be permanently attached to the windshield will). hyphen / etc.). It looks a bit "cheaper" as the original mount used glue instead of a high quality suction cup. but it stays in place and doesn't tilt or rotate unless I move the hotspot manually. All in all, this suction cup mount was a great idea, it just wasn't made to the same tight tolerances as the original Cobb mount, making it less useful. You could probably stick tape or another pad of your choice in the outlet to add more friction and prevent it from tipping/falling without input. Or the company that made the product may actually do quality control and try to make reasonable improvements to their products. It just wasn't made to the tight tolerances of the original Cobb mount, making it less useful. You could probably stick tape or some other pad of your choice in the socket to add more friction and prevent tipping/falling without input. Or the company that manufactured the product actually performs quality control and tries to make reasonable improvements to their products. It just wasn't made to the tight tolerances of the original Cobb mount, making it less useful. You could probably stick tape or another pad of your choice in the outlet to add more friction and prevent it from tipping/falling without input. Or the company that manufactured the product, actually performs quality control and tries to make reasonable improvements to its products. It just wasn't made to the tight tolerances of the original Cobb mount, making it less useful. You could probably stick tape or another pad of your choice in the outlet to add more friction and prevent it from tipping/falling without input. Or the company that manufactured the product actually performs quality control and tries to make reasonable improvements to their products. It just wasn't made to the tight tolerances of the original Cobb mount, making it less useful. You could probably stick tape or some other pad of your choice in the outlet, to cause more friction and prevent it from tipping/falling without input. Or the company that made the product may actually do quality control and try to make reasonable improvements to their products.전체 리뷰보기

maxell 108575 optimally designed recording 로고

Maxell 108575 Optimally Designed Recording

This review is for Maxell UR-90 cartridges, which I have purchased more than one pack of. Yes, the audio is usually quite good, but there were frequent instances where the audio was dull and uneven at the start of playback. It's a bit tricky to diagnose, but I believe the culprit is the tape, not the cassette deck. That's why. I have a fairly new cassette deck (a good 2 cassette Teac) that plays cassettes (about a dozen) I recorded on my previous deck (was also a Teac) thirty years ago (Maxell and TDK tapes with normal offset), plays flawlessly every time and they sound as dynamic as the original recording. No interference, ever! The new cassettes reviewed here are RECORDED ON MY NEW DECK (so you'd think there's increased compatibility when played back) regularly plays poorly (that dull thumping/wow noise) for the first few minutes of playback. A real disappointment. I am convinced that this cassette format, which I like but is no longer "modern" these days, suffers in quality with these Maxell tapes compared to their predecessors that Maxell once produced. (Could be a belt, mechanism, or both.) It's a shame to say that. I'm grateful that Maxell still makes cartridges, but it's a shame the current product can't match the rock-solid reliability of its decades-old cartridge ancestors. They don't make them like they used to. Nowadays, the quality of these reviewed Maxell tapes suffers compared to their predecessors that Maxell manufactured. (Perhaps a belt, mechanism, or both). It's a shame to say that. I'm grateful that Maxell still makes cartridges, but it's a shame the current product can't match the rock-solid reliability of its decades-old cartridge ancestors. They don't make them like they used to. Nowadays, the quality of these respected Maxell tapes suffers compared to their predecessors that Maxell manufactured. (Could be a belt, mechanism, or both.) It's a shame to say that. I'm thankful Maxell still makes cartridges, but it's a shame that the current product cannot match the unwavering reliability of its decades-old cassette ancestors. They don't make them like they used to. that the current product does not match the unwavering reliability of its ten-year-old predecessor cartridges. They don't make them like they used to. Nowadays, the quality of these respected Maxell tapes suffers compared to their predecessors that Maxell manufactured. (Could be a belt, mechanism, or both.) It's a shame to say that. I'm grateful that Maxell still makes cartridges, but it's a shame the current product can't match the rock-solid reliability of its decades-old cartridge ancestors. They don't make them like they used to. that the current product does not match the unwavering reliability of its ten-year-old predecessor cartridges. They don't make them like they used to. Nowadays, the quality of these reviewed Maxell tapes suffers compared to their predecessors that Maxell manufactured. (Could be a belt, mechanism, or both.) It's a shame to say that. I'm grateful that Maxell still makes cartridges, but it's a shame the current product can't match the rock-solid reliability of its decades-old cartridge ancestors. They don't make them like they used to. that the current product does not match the unwavering reliability of its ten-year-old predecessor cartridges. They don't make them like they used to. that the current product does not match the unwavering reliability of its ten-year-old predecessor cartridges. They don't make them like they used to.전체 리뷰보기

universal insignia magnavox panasonic tvs simple 로고

Universal Insignia Magnavox Panasonic TVs Simple

Easy to program

Configured with JVC connection. However, I did have issues with the input not working, but when I pressed a button on the TV, I was able to scroll down. I had problems with the old remote control and therefore with the enter key. And I will definitely keep it. I'm planning to buy a new TV after I turn 10, so having an extra remote is a plus. I get help from a company and they offered to refund my money. They were very helpful in trying to please me.전체 리뷰보기

wasserstein weather resistant integrated charger compatible 로고

Wasserstein Weather Resistant Integrated Charger Compatible

I bought two to test and had no problems with them. I used to drain my batteries every two weeks, but that's no longer the case. They perfectly withstand various weather conditions: snow, ice, rain, wind.전체 리뷰보기

bakery butler 로고

Bakery Butler

What I like best about this software is that it has an easy interface to use,it also helps me keep track of my orders in real time,and i can even see how many items are left in stock for each product so when ordering new products i have enough inventory already prepared.what I dislike most about this software is that sometimes you get errors while using or accessing this system which makes your job difficult if not impossible.I highly recommend this program because it allows us to manage our inventory very easily and quickly.It also saves a lot of time since we no longer need to manually input information into excel sheets. 전체 리뷰보기

lenscoat lclpsmwfg lenspouch small wide (forest green camo) 로고

LensCoat LCLPSMWFG LensPouch Small Wide (Forest Green Camo)

Does the job

The lens case is well designed. It fits my 10-22mm and my 17-85mm with a lens hood (although the latter is a bit more difficult). Handy if you can attach a spare lens and skip your camera bag.전체 리뷰보기

archival quality acid free heavyweight sleeves 로고

Archival Quality Acid Free Heavyweight Sleeves

The best sleeves.

I'm an avid record collector and former record store owner and have been looking for these cases. Anything thicker than 3 mil is too thin and "stretchy", and 4 mil cases are too thick and cloudy quickly. But the best part about these sleeves is that they DO NOT extend 1/4 to 1/2 inch past the top of the record. So no more valves on the record that crumple and crumple. I'm slowly replacing all my sleeves with these. With thousands of entries, this will take some time. Highly recommended.전체 리뷰보기

Loren Schmidt photo

Loren SchmidtS.

Novice Writer
1 수준
38 리뷰
0 카르마

전기

6월 13, 2022에 가입