Review on 🚗 Enhance Your Vehicle's Shine with 3M 06068 Perfect It Ultrafine Machine Polish - 1 Quart by Jacolbe Mind

Worth every penny. This is if you have a black car. I've always been a fan of liquid glass for my car and thought it was great for protecting my paintwork and keeping it dust free. I had no idea how many curls had built up over the years until I finished a 7 hour polish with this product. The twists are gone. Scratches disappeared (after polishing). Headlights are new. An advice. Do not switch to this product without using #1 and #2. It is imperative to use #2 prior to this application as it provides surface preparation. Without them, you'll still see swirl marks and you won't be happy with the result, I promise you. Do the following and you will be happy. Wash your car thoroughly. Gently rub the clay bar, wiping all rough edges. Rinse again. Apply product #1 and follow the directions on the bottle. Read the instructions first. Wipe off excess with microfiber. Go to bottle 2 and use a black pad or a fine wool pad (black pad is usually hard to find) and follow the instructions on the bottle (for bottle 2 the instructions are very important). Wipe off excess with microfiber. Attach a #3 blue foam pad and do not use any other type of applicator. Follow the instructions very carefully because this is a real finisher. Wipe with microfiber and test with an LED flashlight. You should see a streak-free surface. There will be some greasy feedback, but we'll get to that later. Now 2 options: apply polymer layer or use natural wax paste I washed the car again because I would achieve better adhesion of the polymer to the clean surface. 3M polymer wax used. And then paste the wax. Thanks to the #3 paste and foam applicator, I have the cleanest black color I've ever seen on my car. Silver car next week and I'm sure #1+2 will be enough for that. Read the instructions on each bottle! Or you're wasting time and money. Enjoy.