Review on 🔍 Explore the Kreg SK03 Pocket Hole Screw Sizes - Enhancing Your Woodworking Experience! by Mike Travers

Kit includes 1" and 1 1/4" internal silver screws, one set of hardwood screws and one set each for softwood or plywood. It also comes with 2 1/2" blue interior/exterior screws. I purchased the 1 1/4" softwood/plywood blue exterior screws separately and had room to screw some of these with the silver sisters insert so I could grab what I needed I will be using soft woods more often but can use hard woods in cases where I just want to grab a screw or just screw into a 2x4 etc. Great for joining plywood or 2x4/ 4x4 in addition to being used as pocket holes.They enter quickly and easily with no pilot hole and no crevices.You use a square screwdriver that came with my separate order of the Kreg 320 pocket hole kit.I bought the Kreg 320 because it was cheaper than some others, it can be used to drill 2 pocket holes side by side or one pocket hole by removing one of the drill guides from the set and can be used with the handy board tlehre be used. Simply sitting on the table and without a knife, bring the drill sleeve to the existing, installed location for repair or reinforcement. I used it to reinforce the 2x4 horizontal bars I placed to support the attic and to attach a 3/4" plywood divider to a 2x4 post under the attic.