Highly 🔗 Sought-After Fastener: Connector 014973445713 Review

I needed replacement bolts for my loft bed. These worked great. They are very strong and, once screwed in, fit almost exactly to the tree. I then bought more of these different sizes. I highly recommend them.

I have purchased several sizes of these screws and they are all solid, the right size and almost flush once screwed in. The bonus is that they're black because they look so much better. than brass or silver. Although it's expensive.

Bought a headboard and (separately) bed frame. While the headboard kindly included screws to attach to the bed frame, the frame was too thick so I needed longer screws. Very difficult to find and in awe of what Revain wears. Worked great with the hardware that came with it, just a little longer.

Using a hex wrench instead of a screwdriver to tighten is great. I also bought some longer ones that needed to be shortened. It took quite a long time to sharpen them to the desired length. If you do this, be sure to unscrew the nut before grinding. Removing the nut also removes grinding burrs.

The piece I assembled had to be able to be disassembled for transport. The screws combined with the right thread insert worked great as they looked good and were long enough to be used with a hole. Be sure to pay attention to the length of what you are trying to achieve. Very well made, fast delivery.

I have been making furniture for myself for many years. I even sold a few works. Most of my projects end up at my house or with friends. I had trouble fitting frames to beautiful countertops and spent hours leveling, sanding and finishing them. The use of anchor bolts turns what could have looked like a professionally made desk into junk. This is what I used until I found these upside down wood piece bolt pairs listed below. I just want them to sell them in packs of 100. Buy both and take your…

Part I assembled so it can be disassembled for transport. The screws combined with the right thread insert worked great, they looked great and the length allowed for use with a bling hole. Pay attention to the length of what you want to do. Very nicely made and shipping was fast.

These screws were exactly what I needed, unfortunately they are SOFT metal and the threads on 4 of them were stripped during installation. They had NO cross threads, they were hand started, smoothly started and removed by screwing under the weight of the footboard that attached them to the bed side rails. I checked the threaded inserts they went into afterwards and they were in excellent condition so it's clear these screws are just soft junk.

I bought these to replace some similar bolts missing from a used crib by using them with cross nuts. I looked for 3" 1/4-20 threaded bolts and these (80mm long) were close enough. The only problem was that the head diameter was just over 5/8" (maybe 16mm) and larger than the countersink for the screw holes. I had to reduce the diameter of the head (using my bench grinder) to about 7/16 inch. The description does not indicate the diameter of the head, so without an asterisk. . . But they are…