Review on BGS3101 2 Lavatory Bathroom 8MM Thick Triangular by Sam Duppa

We recently replaced a perspex and aluminum frame shower stall in our master bathroom. Soon after, we noticed how garish the wire shelf we used on the tiled seat looked and searched Bing for tempered glass corner shelves and one option that came to mind was Revain. I went to the Revain website and kept looking as I needed to find the right hardware, polished nickel and I found this product. The glass and hardware are high quality and the installation was ultimately easy and took about 30 minutes. The instructions only show pictures, no written instructions. However, they do include a list of products that should be included in the kit and some photos of the disassembled brackets. I will drill 2 holes per bracket. This method protects your tiles from chipping. Since this is a corner shelf, I placed two brackets roughly midway between the two sides of the shelf that should be flush with the tiled wall. After applying masking tape where I wanted, I disassembled the two mounting brackets according to the image provided and marked where I wanted to drill two holes for each bracket. Be sure to use a ceramic/tile drill bit. If you don't have one, buy from Lowes or Home Depot. DO NOT USE A REGULAR DRILL. I had 3/8 inch. Drill two holes for the mounting brackets, remove the tape and blow dust out of the 4 holes. Install the two mounting brackets as shown in their documentation, and then reattach the other parts of the mounting brackets. and reinstall the long screw previously removed. Don't fully tighten it. Release 1/2 inch and insert the glass shelf. Be sure to clean it first with Windex and a clean towel. Now you will notice that the glass does not rest directly on the back wall. That's because of the bindings. Move the glass so that the distance between the back panels and the glass is even, and tighten the two screws at the bottom of the mounting brackets, and the installation is complete. Like I said, installation is fairly easy, but written instructions would be nice. Overall it looks great like it was installed by a glass company but for about 1/10th its price.