Header banner
Revain logoHome Page
Cody Stroop photo
1 Level
1342 Review
76 Karma

Review on Elevated Auto Styling Middle American Exterior Accessories by Cody Stroop

Revainrating 5 out of 5

Looks great! Bumper Stickers, Decals & Magnets

So I'm not really checking things here but felt it would help others. Read the instructions! Read the instructions again! Read the instructions before opening the packaging. I would honestly advise reading the many tips others have given here and not getting discouraged by people who have been through tough times. You MUST take your time installing this. Clean the window thoroughly with wind or another glass cleaner. I cleaned it several times to make sure it was really clean and free of any oil or dirt. I didn't use alcohol but my cleaner already has it. It should be noted that the protective film was cut vertically and not horizontally, as stated in the instructions, but that didn't bother me (take your time). I removed the backing from the center to the right (away from the stars). Clean up just a little and use a squeegee to smooth the vinyl onto the glass. Move through. peel, squeegee, peel, squeegee, etc., then start on the left side, scraping from the center to the left in the direction of the stars. Same process, peel, scrape, peel, scrape, etc. After the backing is removed, it should stick to the glass. DO NOT tear off the masking tape immediately! Big no no. Assemble all the pieces of the Star Banner. I ran the squeegee up and down each strip to make sure all the bubbles came out. Do your best for the stars. THEN use your thumb or forefinger and press firmly along all edges and stars and all around the edge. When finished, peel a corner very slowly, I did it from the bottom left but it doesn't matter. Take your time and take it off slowly. Once you see a bubble, put the mask back on and use a squeegee to remove the bubble. Do not rub the vinyl directly as you may damage it. When it's all off, gently smooth it out with your fingers (avoid using fingernails). Much luck!

Pros
  • For 2019 Dodge RAM 1500/2500/3500 models
Cons
  • Requires socket