Review on 🎶 PHOPOLLO 50ft Bluetooth LED Strip Lights - Color Changing RGB Lighting, App Controlled, Sync to Music by George Cochran

First review after installation: They look good, shine and the 3M adhesive that was attached sticks very well. The basic remote works well, but the phone app is really nice. Easy to install, connect and use! Tips: - Clean the wall/surface before sticking! It is very important to achieve good adhesion! Do not use cleaning agents that can leave marks. These are two (2) 25' rolls (as clearly shown in the pictures). However, the actual rolls are 7.5 meters, which is 24.6 feet. The total length of both lanes is 49.2 feet. NOT 50 feet. Keep that in mind if you need all 50 feet! I almost made a mistake deciding I needed to cut off a few inches. - Pay attention to the polarity when connecting the strips to the controller. The small arrow on the controller connector must match the 12V terminal on the LED strip. Look at the next intersection; 12v stated. I made a small marker dot on the edge of the 12V before inserting and connecting it. - Get some extension cords (search "led strip extension cords") if you don't want the controller sticking to the wall. The controller wires are only about 6 inches long. If you attach the strips to the top of the wall, the controller attaches to the wall directly below the lights. In addition, the power supply cables are short and must be fixed to the wall. also. The supplied cable length is definitely too short for everything. But at this price I'm not complaining. Something else to secure the cables so they don't pull on the lightstrip.