Review on 🎥 AKK BA3 5.8G 40CH VTX: Ultimate FPV Camera & Transmitter for Tiny Whoop Blade Inductrix Drones by Robert Viher

The other day I built my first ATV. Got the fc and tx from a friend and put the pieces together to put it all together. The mount I got was made for 14x14 and didn't quite work, so I attached this little man to the top of the frame with some rubber bands. The previous drone was hubsan h107c. The governor gas is set to 100% at the top and 0% at the bottom. I never thought it could be any different using my friend's drone. On the first mission, the drone fired straight at the ceiling at full speed, ripping the antenna off my poor little camera. Not only that, but when I pushed the switch in a panic, it hit the hard ground with enough force to snap the heads of the pins between two boards and bend the pins. Eventually I found out what was going on and of course I fell again several times. Looks rough. To be fair, the camera still works. I couldn't get it outside, but at least I can get a clear picture inside my apartment with all the doors closed. I ordered another camera which is on the way but now I can use it while I get used to flying.