Review on EONLION AN10 10AN Universal Transmission Aluminium by Joseph Mathis

Pretty decent external oil cooler, can also be used as an intercooler. Connections are OK, may leak if not tightened very carefully. I was hesitant to install something like this but this is for an old project machine and I decided to give it a try. Mounting tabs on the top and bottom facilitated installation with minimal DIY assembly effort. The oil cooler adapter fits most Honda, Subaru and other vehicles with 20mm thread. Installation took a little time to get working properly, but overall not too difficult. I was able to hook everything up and run with no leaks and have been driving in traffic and under boost for a week now and so far it has been fine with much cooler oil temps. As this is an all in one kit some extra work will most likely be required to get everything to fit and work properly, but pretty much everything you need is included in the kit. expensive cars, but it works like a cheap oil cooler that may or may not be reliable over time. It's easy to swap out later if needed, so I don't worry too much about it. Having no major issues, I'm giving this product an above average rating, but your results may vary. Even if you have to buy a custom sandwich adapter for your car, the heat exchanger and the tubing that comes with it should work and definitely lower your oil temp if you happen to be running a little hot.