Review on 🔑 Key Fob Keyless Entry Remote for Toyota Tundra Celica Echo FJ Cruiser Highlander Prius Rav4 Yaris/Scion xA xB (HYQ12BBX HYQ12BAN) by Mike Marks

Probably the first time I did something wrong. It worked on the second try. I have a 2005 4Runner. I followed the instructions below: To enter programming mode, remove the key from the ignition. Unlock all doors. open driver's door. Insert and remove the key in the ignition lock. Insert and remove the key in the ignition lock. Close and open driver's door. Close and open driver's door. Insert the key Switch off the ignition and remove Close and open the door on the driver's side. Close and open the door on the driver's side. Put the key in the ignition. Close the driver's side door. Turn the key to the ON position (but do not start the engine). Turn the key back to the OFF position. , your locks should lock and unlock automatically. If not, repeat the steps. Now to program the remote while you are in programming mode (I think you have to do it within a certain time or programming mode will turn off) - hold down the lock and unlock buttons. on the remote control for about 2 seconds. Release the lock and unlock buttons, then press and hold the lock button for 2 seconds. The door locks should lock once and unlock automatically.