Review on DEWALT DW0881T Laser Tripod Tilting by Jeremy Gums

The tripod looks good but functionally it leaves a lot of room for improvement. The leg clamps aren't too tight, but they're firm enough to hold a light load (for now, anyway). The turret vial is far from calibrated compared to the tripod vial. If the tripod bubble is set exactly on center and the head bubble is aligned on center, a 360 degree head rotation will show that the head is not rotating properly. When rotated 180 degrees, the head is level with a full bladder out and 1/4 of the bladder to the side. Rotating it back to its original position will level the bubble (indicating that the crown has returned to its original position and the spirit level is showing). So it's not very accurate in that regard, but it's ok to use with a self-leveling laser level. I would not recommend it if great accuracy is required. The mounting screw is fairly short and only captures a few turns of the Dewalt laser level I bought with it. One would expect a Dewalt level and tripod connection to be more reliable. The mounting screw is fairly short and only captures a few turns of the Dewalt laser level I bought with it. One would expect a Dewalt level and tripod connection to be more reliable. The mounting screw is fairly short and only captures a few turns of the Dewalt laser level I bought with it. One would expect a Dewalt level and tripod connection to be more reliable.