Review on 📺 WALI Universal TV Stand Table Top for LCD Flat Screen TVs, 22-65 inch, VESA 800x400mm by Rick Gondoras

I bought two of these stands for Sharp Aquos LC-52LE810UN 52" LCD TVs. These TVs weigh about 60 pounds each and this stand works well with them and I see no tipping or issues with the stand not being able to work with these TVs I preferred this design over the typical glass base TV stands I believe this all metal construction was simpler and less likely to break anything due to manufacturing issues In fact these are only 4 solid metal elements bolted together on each side making it difficult to damage during the production process.Their metal construction is good and I don't see any quality issues.I think they offer the same amount if not more than that OEM stands that come with TVs, you don't pay $100 for d This stand, so you need to keep an eye on things. For the price I'm definitely satisfied. and is designed with part of the foot pointing forwards and backwards. Some designs looked like the leg only extended forward so tilting the TV backwards might be an issue, but not with this stand as part of the leg also extends backwards. With my TV and stand at maximum settings, I was able to fit my soundbar into the existing gap between the TV and the legs. I could probably take it one level lower if I didn't want to try and fit a soundbar underneath but not the 3rd so some TVs like mine with a very large bezel might not be able to take advantage of all 3 heights. adjustments. The kit includes a variety of parts for a variety of VESA mount sizes and screw hole sizes. However, the little cover on the side of each leg that you have to run cables under isn't really that useful. There isn't much room for cables under the cover. Just the power cord and two high quality HDMI cables were too much for it and I couldn't put the cover back on. I didn't care as the cables are not visible in my setup as they are all behind the TV.