Review on 📱 Supershieldz 3 Pack RCA Cambio 10.1 Screen Protector - High Definition Clear Shield for W101SA23T1/T2 by Matthew Wheeler

Good thing there are three in the pack. This application is quite simple and easy. However, the overall size is too accurate, especially since the tablet has a small bevel on the edge. The problem with accurate sizing is that it requires very precise application to avoid bubbles on the edges due to the edge on the tablet. Even with exact application, it can still bubble a little. My first app was slightly top-down (landscape) so the bubble was across the entire top edge and a partial bubble along the right edge. My second app is even less disabled than the first, so there's a small bubble at the bottom and a noticeable bubble at the right edge. Rather than try another application I decided to use a utility knife to trim off the excess as shown in the picture. When applying, align the left edge (or top in portrait) due to the webcam hole. When the webcam hole is perfectly aligned, it pushes the length past the opposite edge. My suggestion to anyone buying this is to lay it on the screen before removing the film covers and tape it in place and line up the camera hole. Then use a fine marker to mark the edges and trim about 1/16-1/8 inch. Then when you apply it, it should still cover most of the screen. The screen protector offers really excellent protection. The touch sensitivity of the screen is okay. I didn't have to make any adjustments. And as long as you clean the screen and remove all the dust before applying, everything goes fine (except that the size is too close to the dimensions of the tablet).