Review on 🔧 Enhanced MICTUNING HD+ 12-Gauge LED Light Bar Wiring Harness Kit with 60Amp Relay, 3 Free Fuse, Blue Rocker Switch (2 Lead) by Bryan Covington

Better for light to moderate use than heavy use. The power/ground wires are too short. The cables that go into the passenger compartment to the switch on the dashboard can be slightly longer. Overall a good set of cables for some small LED lights. Edit #2 (see photo). So I connected the cable to the battery as indicated. My headlights work as does the switch, so no complaints about the features. But within two weeks I noticed that my car revs slowly when I start it. So I decided to put a multimeter on the switch. When it was in the OFF position it drew 12.29 volts. And when the switch is in the ON position, it draws 0.05 volts. So when the switch and harness are installed in a car with a battery that is a 12V source, it has a constant pull. So beware of an empty battery! Connected to the fuse box! Also, the switch will light up when all female paddles are installed. Remove #8 + #7 + #6 queen spades to turn off the light.