Review on 🚀 SPEEDWOW Universal Blue Oil Catch Can Tank with Micron Bronze Baffled Filter and Hose Kit: Enhance Engine Performance by Jason Hinrichs

I was very pleased to have purchased this for my 17 Ford F-150 2.7L Ecoboost. The first problem was that there were no instructions to properly show you how to complete the task. So here is how to install.1. Locate your PCV line, disconnect it, completely remove this line, once removed it should have a brown hole. 2. Disconnect intake manifold pipe completely and set aside.3. Take some white kevlar tape and wrap the threads on the hose connectors that screw onto the can! Then insert them into the body of the jar.4. Find a place for your catch. Attach with included installation hardware.5. Shorten the required length of the supplied hose to suit the installation site.6. Now the connectors for the remote lines need to be attached to the end of the tubing that will not be connected to the trap. To remove the connector ends, heat the strip leads and they will expand (low flame) allowing you to remove the connector ends.7. Place the removed connection lines on top of the two cleanly cut hose assemblies and secure each with the supplied clamps (larger clamps may be required).8. Attach one end of the connector to the intake manifold which will attach to the "outlet" position on the receiver (remember to clip next to the threaded body for safety). Finally attach the other end of the connector to the PCV body , which are pushed onto the "in" threaded housing and clamped INSTALLATION IS COMPLETE!